All,
Note that the definition of the Hold-New-Jobs operation states
When the Printer completes all the 'pending' and 'processing' jobs,
it enters the 'idle' state as usual. An operator monitoring Printer
state changes will know when the Printer has completed all current
jobs because the Printer enters the 'idle' state.
Thus the Printer does not enter the 'stopped' state as currently
indicated in the text. It is the Pause-Printer and
Pause-Printer-After-Current-Job operations that move the state of the
Printer to stopped' and put the 'moving-to-paused'
Or 'paused' values into "printer-state-reasons".
Peter Zehler
Xerox Research Center Webster
Email: Peter.Zehler at Xerox.com
Voice: (585) 265-8755
FAX: (585) 265-7441
US Mail: Peter Zehler
Xerox Corp.
800 Phillips Rd.
M/S 128-25E
Webster NY, 14580-9701
From: ipp-bounces at pwg.org [mailto:ipp-bounces at pwg.org] On Behalf Of
Zehler, Peter
Sent: Sunday, April 17, 2011 7:09 AM
To: IPP at pwg.org
Subject: [IPP] RFC3998 errata
All,
There appears to be a cut and paste error in the definition of the
"printer-state-reasons" value 'hold-new-jobs' in rfc3998.
The current text is:
8.1. 'hold-new-jobs' Value
'hold-new-jobs': The operator has issued the Hold-New-Jobs operation
(see section 3.3.1
<http://tools.ietf.org/html/rfc3998#section-3.3.1> ) or other means, but
the output-device(s) are
taking an appreciable time to stop. Later, when all output has
stopped, the "printer-state" becomes 'stopped', and the 'paused'
value replaces the 'moving-to-paused' value in the "printer-
state-reasons" attribute. This value MUST be supported if the
Hold-New-Jobs operation is supported and the implementation takes
significant time to pause a device in certain circumstances.
I believe it should be something like:
8.1. 'hold-new-jobs' Value
'hold-new-jobs': The operator has issued the Hold-New-Jobs operation
(see section 3.3.1
<http://tools.ietf.org/html/rfc3998#section-3.3.1> ) or has initiated
the holding of new jobs by
other means. This value indicates that all Jobs subsequently
submitted to the Printer will be placed into the 'pending-held'
state. Thus all newly accepted jobs will be automatically held
by the Printer. This "printer-state-reasons" value will be
removed
when the Operator issues the Release-Held-New-Jobs Operation or
releases the holding of new jobs by other means.
Peter Zehler
Xerox Research Center Webster
Email: Peter.Zehler at Xerox.com
Voice: (585) 265-8755
FAX: (585) 265-7441
US Mail: Peter Zehler
Xerox Corp.
800 Phillips Rd.
M/S 128-25E
Webster NY, 14580-9701
--
This message has been scanned for viruses and
dangerous content by MailScanner <http://www.mailscanner.info/> , and is
believed to be clean.
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.pwg.org/pipermail/ipp/attachments/20110417/5c4b3de4/attachment-0001.html>