[IPP] Slides to discuss Orientation and feed direction in Finishings 2.x posted

[IPP] Slides to discuss Orientation and feed direction in Finishings 2.x posted

[IPP] Slides to discuss Orientation and feed direction in Finishings 2.x posted

Kennedy, Smith (Wireless Architect) smith.kennedy at hp.com
Tue May 17 12:16:09 UTC 2016


Greetings,

Attached is an updated slide set as per the last IPP WG meeting.  Please review before next meeting and reply with feedback via email if possible if there are any glaring issues with the way that I've encoded things.  This is a complex problem, which would benefit from broad review.

Cheers,

Smith



> On 2016-04-28, at 10:24 AM, Kennedy, Smith (Wireless Architect) <smith.kennedy at hp.com> wrote:
> 
> Greetings,
> 
> I have posted a brief slide set that I will use later today to try to illustrate issue I think needs to be addressed in Finishings 2.1, that concerns managing finishings options based on job orientation and/or feed orientation.  It is here:
> 
> http://ftp.pwg.org/pub/pwg/ipp/slides/Finishings-2.1-Orientation-and-Feed-Orientation-Extensions.pdf
> 
> I've also updated the meeting page to list this slide deck.
> 
> Cheers,
> 
> Smith
> 

-------------- next part --------------
A non-text attachment was scrubbed...
Name: Finishings-2.1-Orientation-and-Feed-Orientation-Extensions-2016-05-17.pdf
Type: application/pdf
Size: 164087 bytes
Desc: not available
URL: <http://www.pwg.org/pipermail/ipp/attachments/20160517/4ab7a39d/attachment.pdf>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 4956 bytes
Desc: not available
URL: <http://www.pwg.org/pipermail/ipp/attachments/20160517/4ab7a39d/attachment.p7s>


More information about the ipp mailing list