Greetings,
This revision of the slide set is now on the FTP site here:
http://ftp.pwg.org/pub/pwg/ipp/slides/Finishings-2.1-Orientation-and-Feed-Orientation-Extensions-2016-05-17.pdf
Smith
/**
Smith Kennedy
Wireless Architect - Client Software - IPG-PPS
Standards - IEEE ISTO PWG / Bluetooth SIG / Wi-Fi Alliance / NFC Forum / USB IF
PWG Chair
HP Inc.
*/
> On 2016-05-17, at 6:16 AM, Kennedy, Smith (Wireless Architect) <smith.kennedy at hp.com> wrote:
>> Greetings,
>> Attached is an updated slide set as per the last IPP WG meeting. Please review before next meeting and reply with feedback via email if possible if there are any glaring issues with the way that I've encoded things. This is a complex problem, which would benefit from broad review.
>> Cheers,
>> Smith
>>>>> On 2016-04-28, at 10:24 AM, Kennedy, Smith (Wireless Architect) <smith.kennedy at hp.com> wrote:
>>>> Greetings,
>>>> I have posted a brief slide set that I will use later today to try to illustrate issue I think needs to be addressed in Finishings 2.1, that concerns managing finishings options based on job orientation and/or feed orientation. It is here:
>>>>http://ftp.pwg.org/pub/pwg/ipp/slides/Finishings-2.1-Orientation-and-Feed-Orientation-Extensions.pdf>>>> I've also updated the meeting page to list this slide deck.
>>>> Cheers,
>>>> Smith
>>>> <Finishings-2.1-Orientation-and-Feed-Orientation-Extensions-2016-05-17.pdf>_______________________________________________
> ipp mailing list
>ipp at pwg.org>https://www.pwg.org/mailman/listinfo/ipp
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 4956 bytes
Desc: not available
URL: <http://www.pwg.org/pipermail/ipp/attachments/20160523/3ef5c338/attachment.p7s>