Greetings,
I have just posted another new draft of IPP Finishings 2.1:
http://ftp.pwg.org/pub/pwg/ipp/wd/wd-ippfinishings21-20161004.pdfhttp://ftp.pwg.org/pub/pwg/ipp/wd/wd-ippfinishings21-20161004.docxhttp://ftp.pwg.org/pub/pwg/ipp/wd/wd-ippfinishings21-20161004-rev.pdfhttp://ftp.pwg.org/pub/pwg/ipp/wd/wd-ippfinishings21-20161004-rev.docx
Changes include:
* In section 5.3 , enhanced definition of "job-pages-per-set" to clarify that
the value needs to be an exact multiple of the number of pages in all
Documents in the Job, which also clarifies the expectations of how that
attribute value is set in the case of a multiple document Job.
* Modified the "job-constraints-supported" attribute example at the end of
section 6.9:
* Removed mention of "media-source"='tray-2' because the input source doesn't
matter.
* Added a second value to "finishings" and "finishing-template" so that the
example illustrates that attributes in a constraint can have more than one
value even when the attribute itself is defined to have only one value. Also
called this out with an additional sentence below the example.
* Moved open curly braces to the same line as the equal sign to reduce number
of lines used
* Modified the "job-resolvers-supported" attribute example at the end of section
6.9:
* make the resolution either use "short-edge-feed" or to change the media
source to 'tray-1' (usually a manual feed input source, at least on HP
printers) where the user might be instructed via a prompt to provide the
needed media size and feed orientation.
* Moved open curly braces to the same line as the equal sign to reduce number
of lines used
* Removed mention of alternate stitching angles because they don't resolve the
problem
Cheers,
Smith
/**
Smith Kennedy
Wireless Architect - Client Software - IPG-PPS
Standards - IEEE ISTO PWG / Bluetooth SIG / Wi-Fi Alliance / NFC Forum / USB IF
Chair, IEEE ISTO Printer Working Group
HP Inc.
*/