[IPP] High-level changes section for IPP Finishings v2.1?

[IPP] High-level changes section for IPP Finishings v2.1?

[IPP] High-level changes section for IPP Finishings v2.1?

Ira McDonald blueroofmusic at gmail.com
Wed Nov 9 14:57:19 UTC 2016


Hi Mike,

I like your suggestion and agree with your initial suggested content.

These "Changes Since" sections are important for new readers and
those who've "been away for awhile."

Cheers,
- Ira


Ira McDonald (Musician / Software Architect)
Co-Chair - TCG Trusted Mobility Solutions WG
Chair - Linux Foundation Open Printing WG
Secretary - IEEE-ISTO Printer Working Group
Co-Chair - IEEE-ISTO PWG Internet Printing Protocol WG
IETF Designated Expert - IPP & Printer MIB
Blue Roof Music / High North Inc
http://sites.google.com/site/blueroofmusic
http://sites.google.com/site/highnorthinc
mailto: blueroofmusic at gmail.com
Jan-April: 579 Park Place  Saline, MI  48176  734-944-0094
May-Dec: PO Box 221  Grand Marais, MI 49839  906-494-2434


On Wed, Nov 9, 2016 at 8:29 AM, Michael Sweet <msweet at apple.com> wrote:

> All,
>
> It occurs to me, after looking at the current stable draft of IPP
> Finishings 2.1, that we don't have a high-level "Changes" section detailing
> the changes between published versions of PWG 5100.1 like we do for
> RFC2910bis and RFC2911bis, and that such a section would help our
> discussions at the F2F as well as providing useful context for readers once
> the update is published.
>
> Proposed content:
>
> 11. Overview of Changes
>
> 11.1 Changes in IPP Finishings v2.1
>
> The following changes were made for IPP Finishings v2.1:
>
> - Added finishing enums and templates for multiple-hole punching and an
> engineering Z fold.
> - Defined an extension naming convention for the "finishing-template"
> member attribute.
> - Added the "media-sheets-supported" member attribute for the
> "finishings-col-database" and "finishings-col-ready" attributes.
> - Added the "stitching-method" member attribute for the "finishings-col",
> "finishings-col-database", and "finishings-col-ready" attributes.
> - Added the "printer-finisher-supplies" and "printer-finisher-supplies-description"
> attributes.
>
> 11.2 Changes in IPP Finishings v2.0
>
> The following changes were made for IPP Finishings v2.0:
>
> - Moved definition of PWG 5100.3 "finishings-col" attribute to this
> document and added new member attributes for all finishings processes.
> - Added finishing enums and templates for coating, lamination, triple
> stapling, different kinds of punching, and common folds.
> - Added the "finishings-col-database" and "job-pages-per-set" attributes.
> - Added the "media-size" and "media-size-name" member attributes for the
> "finishings-col-database" and "finishings-col-ready" attributes.
>
> _________________________________________________________
> Michael Sweet, Senior Printing System Engineer
>
> _______________________________________________
> ipp mailing list
> ipp at pwg.org
> https://www.pwg.org/mailman/listinfo/ipp
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.pwg.org/pipermail/ipp/attachments/20161109/fc310c68/attachment.html>


More information about the ipp mailing list