[IPP] LCRC draft of PWG Safe G-Code Subset for 3D Printing posted

[Ira McDonald]

Hi Mike,

Two "successful" downloads of the LCRC plaintext file still yield a
zero-length
file.  Same info from the PWG direct FTP site.  Huh?

Cheers,
- Ira

Ira McDonald (Musician / Software Architect)
Co-Chair - TCG Trusted Mobility Solutions WG
Co-Chair - TCG Metadata Access Protocol SG
Chair - Linux Foundation Open Printing WG
Secretary - IEEE-ISTO Printer Working Group
Co-Chair - IEEE-ISTO PWG Internet Printing Protocol WG
IETF Designated Expert - IPP & Printer MIB
Blue Roof Music / High North Inc
http://sites.google.com/site/blueroofmusic
http://sites.google.com/site/highnorthinc
mailto: blueroofmusic at gmail.com
PO Box 221  Grand Marais, MI 49839  906-494-2434



On Mon, Mar 18, 2019 at 11:39 AM Michael Sweet via ipp <ipp at pwg.org> wrote:

> All,
>
> I have posted the LCRC draft of the PWG Safe G-Code Subset for 3D Printing
> best practice document to:
>
>         https://ftp.pwg.org/pub/pwg/ipp/wd/wd-pwgsafegcode10-20190318.docx
>         https://ftp.pwg.org/pub/pwg/ipp/wd/wd-pwgsafegcode10-20190318.pdf
>
> https://ftp.pwg.org/pub/pwg/ipp/wd/wd-pwgsafegcode10-20190318-rev.pdf
>         https://ftp.pwg.org/pub/pwg/ipp/wd/lcrc-pwgsafegcode10.txt
>
> The only comment and change is to fix two broken section references in
> table 1.
>
> _________________________________________________________
> Michael Sweet, Senior Printing System Engineer
>
> _______________________________________________
> ipp mailing list
> ipp at pwg.org
> https://www.pwg.org/mailman/listinfo/ipp
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.pwg.org/pipermail/ipp/attachments/20190318/70a21377/attachment.html>