[IPP] LCRC draft of PWG Safe G-Code Subset for 3D Printing posted

[IPP] LCRC draft of PWG Safe G-Code Subset for 3D Printing posted

Michael Sweet msweet at apple.com
Mon Mar 18 20:21:45 UTC 2019


Hmm, I think my FTP software has trouble with short files (or something else unfortunate is happening) - was having the same problem with uploading the IPP WG web page, too.

Try it now (uploaded via SSH...)


> On Mar 18, 2019, at 3:59 PM, Ira McDonald <blueroofmusic at gmail.com> wrote:
> 
> Hi Mike,
> 
> Two "successful" downloads of the LCRC plaintext file still yield a zero-length
> file.  Same info from the PWG direct FTP site.  Huh?
> 
> Cheers,
> - Ira
> 
> Ira McDonald (Musician / Software Architect)
> Co-Chair - TCG Trusted Mobility Solutions WG
> Co-Chair - TCG Metadata Access Protocol SG
> Chair - Linux Foundation Open Printing WG
> Secretary - IEEE-ISTO Printer Working Group
> Co-Chair - IEEE-ISTO PWG Internet Printing Protocol WG
> IETF Designated Expert - IPP & Printer MIB
> Blue Roof Music / High North Inc
> http://sites.google.com/site/blueroofmusic <http://sites.google.com/site/blueroofmusic>
> http://sites.google.com/site/highnorthinc <http://sites.google.com/site/highnorthinc>
> mailto: blueroofmusic at gmail.com <mailto:blueroofmusic at gmail.com>
> PO Box 221  Grand Marais, MI 49839  906-494-2434
> 
> 
> 
> On Mon, Mar 18, 2019 at 11:39 AM Michael Sweet via ipp <ipp at pwg.org <mailto:ipp at pwg.org>> wrote:
> All,
> 
> I have posted the LCRC draft of the PWG Safe G-Code Subset for 3D Printing best practice document to:
> 
>         https://ftp.pwg.org/pub/pwg/ipp/wd/wd-pwgsafegcode10-20190318.docx <https://ftp.pwg.org/pub/pwg/ipp/wd/wd-pwgsafegcode10-20190318.docx>
>         https://ftp.pwg.org/pub/pwg/ipp/wd/wd-pwgsafegcode10-20190318.pdf <https://ftp.pwg.org/pub/pwg/ipp/wd/wd-pwgsafegcode10-20190318.pdf>
>         https://ftp.pwg.org/pub/pwg/ipp/wd/wd-pwgsafegcode10-20190318-rev.pdf <https://ftp.pwg.org/pub/pwg/ipp/wd/wd-pwgsafegcode10-20190318-rev.pdf>
>         https://ftp.pwg.org/pub/pwg/ipp/wd/lcrc-pwgsafegcode10.txt <https://ftp.pwg.org/pub/pwg/ipp/wd/lcrc-pwgsafegcode10.txt>
> 
> The only comment and change is to fix two broken section references in table 1.
> 
> _________________________________________________________
> Michael Sweet, Senior Printing System Engineer
> 
> _______________________________________________
> ipp mailing list
> ipp at pwg.org <mailto:ipp at pwg.org>
> https://www.pwg.org/mailman/listinfo/ipp <https://www.pwg.org/mailman/listinfo/ipp>

_________________________________________________________
Michael Sweet, Senior Printing System Engineer

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.pwg.org/pipermail/ipp/attachments/20190318/003e0007/attachment.html>


More information about the ipp mailing list