PWG-ANNOUNCE> New Last Call: New Printer MIB Enums for the FIN MIB

PWG-ANNOUNCE> New Last Call: New Printer MIB Enums for the FIN MIB

PWG-ANNOUNCE> New Last Call: New Printer MIB Enums for the FIN MIB

Ron Bergman rbergma at dpc.com
Tue Jun 9 10:58:19 EDT 1998


This is an update to the proposal to add new enumerations required by
the Finisher MIB to the Printer MIB.  I have revised the Alert Group 
enumerations to add finAttributeTable(33) per Tom Hastings request on 
June 4th.  All other proposed added enums are unchaged.


This announcement is a last call for comments regarding the addition 
of these new enumeration values.  


All comments should be directed to the PWG-ANNOUNCE mail list.


The last call for comments will close on June 24, 1998.




1.  Alert Group enumerations:


PrtAlertGroupTC ::= TEXTUAL-CONVENTION
-- This value is a type 1 enumeration for values in the range
-- 1 to 29.
-- Values of 30 and greater are type 2 enumerations and are
-- for use in other MIBs that augment tables in the Printer
-- MIB. Therefore, other MIBs may assign alert codes of 30 or
-- higher to use the alert table from the Printer MIB without
-- requiring revising and re-publishing this document.
    STATUS     current
    DESCRIPTION
      "The type of sub-unit within the printer model that this
       alert is related.  Input, output, and markers are
       examples of printer model groups, i.e., examples of
       types of sub-units. Wherever possible, these
       enumerations match the sub-identifier that identifies
       the relevant table in the printer MIB.


       NOTE: Alert type codes have been added for the host
       resources MIB storage table and device table. These
       additional types are for situations in which the
       printer's storage and device objects
       must generate alerts (and possibly traps for critical
       alerts)."
    SYNTAX     INTEGER {
         other(1),
         hostResourcesMIBStorageTable(3),
         hostResourcesMIBDeviceTable(4),
         generalPrinter(5),
         cover(6),
         localization(7),
         input(8),
         output(9),
         marker(10),
         markerSupplies(11),
         markerColorant(12),
         mediaPath(13),
         channel(14),
         interpreter(15),
         consoleDisplayBuffer(16),
         consoleLights(17),
         alert(18),
    -- Added values for Finisher MIB
         finDevice(30),
         finSupply(31),
         finSupplyMediaInput(32),
         finAttributeTable(33)
    -- End of added values
         }




2. Marker Supplies Type enumerations:


PrtMarkerSuppliesTypeTC ::= TEXTUAL-CONVENTION
-- This is a type 3 enumeration 
    STATUS       current
    DESCRIPTION
      "The type of this supply."
    SYNTAX       INTEGER {
         other(1),
         unknown(2),
         toner(3),
         wasteToner(4),
         ink(5),
         inkCartridge(6),
         inkRibbon(7),
         wasteInk(8),
         opc(9),    --photo conductor
         developer(10),
         fuserOil(11),
         solidWax(12),
         ribbonWax(13),
         wasteWax(14),
         fuser(15),
         coronaWire(16),
         fuserOilWick(17),
         cleanerUnit(18),
         fuserCleaningPad(19),
         transferUnit(20),
         tonerCartridge(21),
         fuserOiler(22),
    -- Added values for Finisher MIB
         water(23),
         wasteWater(24),
         glueWaterAdditive(25),
         wastePaper(26),
         bindingSupply(27),
         bandingSupply(28),
         stitchingWire(29),
         shrinkWrap(30),
         paperWrap(31),
         staples(32),
         inserts(33),
         covers(34)
    -- End of added values
     }


---------------------------------------------------------


	Ron Bergman
	Dataproducts Corp.



More information about the Pwg-announce mailing list