IPP> RE: PWG> Media Names Standard, Version D0.5 Available

IPP> RE: PWG> Media Names Standard, Version D0.5 Available

Hastings, Tom N hastings at cp10.es.xerox.com
Fri Mar 30 19:05:39 EST 2001


I just ordered a copy from the ASME.  It should be here next Tuesday.

Tom

-----Original Message-----
From: Bergman, Ron [mailto:Ron.Bergman at Hitachi-hkis.com]
Sent: Thursday, March 29, 2001 07:38
To: 'Hastings, Tom N'; RonBergman at aol.com
Cc: pwg at pwg.org; ipp at pwg.org
Subject: RE: IPP> RE: PWG> Media Names Standard, Version D0.5 Available


Tom,

I do not have access to ASME-Y14.1M, so I am unable to do this
research.  Do you have a copy?

	Ron


-----Original Message-----
From: Hastings, Tom N [mailto:hastings at cp10.es.xerox.com]
Sent: Wednesday, March 28, 2001 7:14 PM
To: RonBergman at aol.com
Cc: pwg at pwg.org; ipp at pwg.org
Subject: IPP> RE: PWG> Media Names Standard, Version D0.5 Available


IPP (RFC2911) has a number of media names that include engineering sizes
taken from [ASME-Y14.1M].  For some reason we only included them as media
names (e.g., iso-a1x3-transparent), and not as media size names (e.g.,
iso-a1x3) in IPP.  These size names are:

iso-a1x3, iso-a1x4
iso-a2x3, iso-a2x4, iso-a2x5
iso-a3x3, iso-a3x4, iso-a3x5, iso-a3x6, iso-a3x7
iso-a4x3, iso-a4x4, iso-a4x5, iso-a4x6, iso-a4x7, iso-a4x8, iso-a4x9

Should we add them?

Someone should look at [ASME-Y14.1M] and get the proper length dimensions
(which aren't in IPP), to go with the width dimensions which are in IPP.

Thanks,
Tom


-----Original Message-----
From: RonBergman at aol.com [mailto:RonBergman at aol.com]
Sent: Tuesday, March 27, 2001 11:48
To: pwg at pwg.org; ipp at pwg.org
Subject: PWG> Media Names Standard, Version D0.5 Available


The latest version is now available at:

ftp://ftp.pwg.org/pub/pwg/media-sizes/pwg-media-05.pdf

The major change is the merging of the envelope sizes
with the other tables and the separation of the media
type with the size.  In addition I have added the
definition of a format for custom media types and color
per a request from Norbert.

There are still two open issues that I am waiting for
clarification from Tom.

1. Tom added a reference [REG] in section 3, but no
corresponding entry in the References section.

2. The ABNF for the size name in section 5.1 may be
incorrect.  I am not an ABNF expert, but I believe that
    | "-" | "-" )  should be simply   | "-" )

I will try to attend the IPP teleconference tomorrow
to discuss any other issues concerning this document.

     Ron Bergman
     Hitachi Koki Imaging Solutions



More information about the Pwg mailing list