[SM3] FW: SM2, 1.185: JobConstraintsSupported, JobResolversSupported

[SM3] FW: SM2, 1.185: JobConstraintsSupported, JobResolversSupported

Zehler, Peter Peter.Zehler at xerox.com
Thu Jan 30 21:03:50 UTC 2014


That was the intent but the base classes were added midway through the MFD work so I may have missed a few things.

From: Ira McDonald [mailto:blueroofmusic at gmail.com]
Sent: Thursday, January 30, 2014 4:01 PM
To: Norbert Schade; Ira McDonald; Semantic Model 3.0 Workgroup discussion list; Zehler, Peter
Subject: Re: FW: [SM3] SM2, 1.185: JobConstraintsSupported, JobResolversSupported

Hi Norbert,
I see what you mean.  It's an oversight.  Constraints/Resolvers is supposed
to be present for every Job service (not Resource or System Control).
Pete - shouldn't these be in the base ImagingServiceDescriptionType?
Cheers,
- Ira

Ira McDonald (Musician / Software Architect)
Co-Chair - TCG Trusted Mobility Solutions WG
Chair - Linux Foundation Open Printing WG
Secretary - IEEE-ISTO Printer Working Group
Co-Chair - IEEE-ISTO PWG Internet Printing Protocol WG
IETF Designated Expert - IPP & Printer MIB
Blue Roof Music / High North Inc
http://sites.google.com/site/blueroofmusic
http://sites.google.com/site/highnorthinc
mailto: blueroofmusic at gmail.com<mailto:blueroofmusic at gmail.com>
Winter  579 Park Place  Saline, MI  48176  734-944-0094
Summer  PO Box 221  Grand Marais, MI 49839  906-494-2434

On Thu, Jan 30, 2014 at 12:53 PM, Norbert Schade <Norbert.Schade at conexant.com<mailto:Norbert.Schade at conexant.com>> wrote:
Ira,
Let me answer to you directly.

This scan section is way shorter:

        <xs:complexType name="ScanServiceDescriptionType">
                <xs:complexContent>
                        <xs:extension base="ImagingServiceDescriptionType">
                                <xs:sequence>
                                        <!--  service type (function of this service object) REQUIRED - MUST be single-valued  see WIMS Object Model - section 4 [WIMS-PRO] -->
                                        <!--  list of URI supported by this service  REQUIRED - MAY be multi-valued  see printer-uri-supported - section 4.4.1 [RFC2911] -->
                                        <!-- service vendor-supplied description and/or label  OPTIONAL - MUST be single-valued  see printer-info - section 4.4.6 [RFC2911] -->
                                        <!--  Object administrative name OPTIONAL - MUST be single-valued  see printer-name - section 4.4.4 [RFC2911]  see prtGeneralPrinterName - section 6 [RFC3805] -->
                                        <!-- list of services (by ID/name/URI) subordinate to this service  REQUIRED - MAY be multi-valued -->
                                        <!-- list of devices (by ID/name/URI) subordinate to this service  REQUIRED - MAY be multi-valued -->
                                        <!-- list of subunits (by ID) supported by this service,  REQUIRED - MAY be multi-valued  see Printer Sub-Units - section 2.2 [RFC3805] -->
                                        <!--  document formats supported by this service REQUIRED - MAY be multi-valued  see document-format-supported - section 4.4.22 [RFC2911] -->
                                        <!-- list of resources (by ID/name/URI) supported by this service  OPTIONAL - MAY be multi-valued see ResourceId in Resource XML schema  see ResourceName in Resource XML schema -->
                                        <xs:element ref="DocumentPasswordSupported" minOccurs="0"/>
                                        <xs:element ref="JobPasswordSupported" minOccurs="0"/>
                                        <xs:element ref="JobPasswordEncryptionSupported" minOccurs="0"/>
                                        <xs:any namespace="##other" minOccurs="0" maxOccurs="unbounded"/>
                                </xs:sequence>
                        </xs:extension>
                </xs:complexContent>
                <!-- ScanServiceDescription - group -->
        </xs:complexType>


Than the corresponding extension in the print service.
There I find the constraints stuff additionally.
Norbert

-----Original Message-----
From: sm3-bounces at pwg.org<mailto:sm3-bounces at pwg.org> [mailto:sm3-bounces at pwg.org<mailto:sm3-bounces at pwg.org>] On Behalf Of Ira McDonald
Sent: Thursday, January 30, 2014 12:46 PM
To: Semantic Model 3.0 Workgroup discussion list; Ira McDonald
Subject: Re: [SM3] SM2, 1.185: JobConstraintsSupported, JobResolversSupported

Hi Norbert,

ALL of the services (including ScanServiceDescription) import and extend the base ImagingServiceDescriptionType).

I think this is what you wanted?

Cheers,
- Ira


Ira McDonald (Musician / Software Architect) Co-Chair - TCG Trusted Mobility Solutions WG Chair - Linux Foundation Open Printing WG Secretary - IEEE-ISTO Printer Working Group Co-Chair - IEEE-ISTO PWG Internet Printing Protocol WG IETF Designated Expert - IPP & Printer MIB Blue Roof Music / High North Inc http://sites.google.com/site/blueroofmusic
http://sites.google.com/site/highnorthinc
mailto: blueroofmusic at gmail.com<mailto:blueroofmusic at gmail.com>
Winter  579 Park Place  Saline, MI  48176  734-944-0094<tel:734-944-0094> Summer  PO Box 221  Grand Marais, MI 49839  906-494-2434<tel:906-494-2434>



On Thu, Jan 30, 2014 at 11:45 AM, Norbert Schade < Norbert.Schade at conexant.com<mailto:Norbert.Schade at conexant.com>> wrote:

> Just for the high level view:
>
> I find JobConstraintsSupported and JobResolversSupported objects under
> PrintServiceDescription under PrintServiceBaseType under PrintService
> in the PrintService schema.
> As PrintServiceBaseType is also providing PrintServiceCapabilities,
> this is rather nicely tied up, meaning it can all be covered in one
> complex structure.
>
> When I search through the ScanService schema, I do find
> ScanServiceCapabilities and ScanServiceDescription objects.
> But the ...Description object is much shorter, especially not
> providing any reference to that constraints stuff.
> So to me it looks as if I'm supposed to create a somewhat independent
> xml instance based on the ServiceTypes schema that deals with constraints.
> Is that currently under review? Perhaps going to be merged into a
> common ...Description object?
> If yes, what is the intended schedule? Is that almost ready for a vote
> or still heavily edited these days? That would likely have an impact
> on which SM version we follow in our internal design.
> Regards
> Norbert
>
>
> Norbert Schade
> Systems Engineer (printing)
> Imaging Solutions
> Conexant Systems, Inc.
> 201 Jones Road
> Waltham, MA 02451
> U.S.A.
> Tel: 1-781-370-8929<tel:1-781-370-8929>
> Email: norbert.schade at conexant.com<mailto:norbert.schade at conexant.com><mailto:norbert.schade at conexant.com<mailto:norbert.schade at conexant.com>>
>
>
> Conexant E-mail Firewall (Conexant.Com) made the following annotations
> ---------------------------------------------------------------------
> ********************** Legal Disclaimer ****************************
>
> "This email may contain confidential and privileged material for the
> sole use of the intended recipient. Any unauthorized review, use or
> distribution by others is strictly prohibited. If you have received
> the message in error, please advise the sender by reply email and delete the message.
> Thank you."
>
> **********************************************************************
>
> ---------------------------------------------------------------------
>
> _______________________________________________
> sm3 mailing list
> sm3 at pwg.org<mailto:sm3 at pwg.org>
> https://www.pwg.org/mailman/listinfo/sm3
>
_______________________________________________
sm3 mailing list
sm3 at pwg.org<mailto:sm3 at pwg.org>
https://www.pwg.org/mailman/listinfo/sm3

Conexant E-mail Firewall (Conexant.Com) made the following annotations
---------------------------------------------------------------------
********************** Legal Disclaimer ****************************

"This email may contain confidential and privileged material for the sole use of the intended recipient. Any unauthorized review, use or distribution by others is strictly prohibited. If you have received the message in error, please advise the sender by reply email and delete the message. Thank you."

**********************************************************************

---------------------------------------------------------------------



More information about the sm3 mailing list