Ira,
FYI, I will not be able to call in for this one... Will try to call in for the others, but I think we have a pretty good start on the FinishingsCol mappings...
On Jul 19, 2014, at 6:13 PM, Ira McDonald <blueroofmusic at gmail.com> wrote:
> Hello,
>> Our next JDFMAP special call will be on Monday 21 July at
> 7:30-8:30 US PDT / 10:30-11:30 US EDT / 16:30-17:30 CEST
>> Call-in toll-free number (US/Canada): 1-866-469-3239
> Call-in toll number (US/Canada): 1-650-429-3300 (Primary)
> Call-in toll number (US/Canada): 1-408-856-9570 (Backup)
> Attendee Access Code: *******#
> Attendee ID Code: # (empty)
>> NOTE: DO NOT USE the audio bridge number shown by WebEx
> - instead use the regular PWG conference bridge listed above!
>> Topic: JDFMAP Discussions
> Date: Every Monday, from Monday, July 21, 2014 to no end date
> Time: 10:30 am, Eastern Daylight Time (New York, GMT-04:00)
> Meeting Number: 683 505 355
> Meeting Password: Printing123
>> -------------------------------------------------------
> Meeting information
> -------------------------------------------------------
> 1. Go to
>https://ieee-isto.webex.com/ieee-isto/j.php?MTID=me80ad87529b4ae33f134c1fb19354cd1>> 2. If requested, enter your name and email address.
> 3. If a password is required, enter the meeting password: Printing123
> 4. Click "Join".
>> -------------------------------------------------------
> For assistance
> -------------------------------------------------------
> 1. Go to https://ieee-isto.webex.com/ieee-isto/mc> 2. On the left navigation bar, click "Support".
>> Agenda:
>> (1) PWG IP Policy and Minute Taker
> - volunteer as minute taker?
>> (2) Review latest draft of CIP4 JDF to PWG PJT Mapping
> - ftp://ftp.pwg.org/pub/pwg/sm3/wd/wd-smjdfmap10-20140604-rev.pdf> - PDF of revisions with line numbers
>> - ftp://ftp.pwg.org/pub/pwg/sm3/wd/wd-smjdfmap10-20140604-rev.docx> - MS Word source of revisions with line numbers
>> Rainer - *please* do any updates with "Track Changes" enabled
> *in*
> *the MS Word source* (with a changed date suffix in filename), both
> new revisions and new comments, and send to Rick & Ira - thank you!
>> (3) Review Mike Sweet's Finishings mappings
> - http://ftp.pwg.org/pub/pwg/ipp/minutes/ippv2-concall-minutes-20140616.pdf> - see below for Mike's original Finishings mappings proposal
>> (4) Next steps
> - JDFMAP special call on Monday 28 July
> - SM WG session at PWG F2F on Wednesday 13 August
> - JDFMAP special call on Monday 18 August
>> Cheers,
> - Ira and Rick (co-editors of JDFMAP spec)
>> -----------------------------------------------
>> - Mike's original Finishings mappings proposal on Monday 9 June
>> Bailing -> Wrapping/WrappingParams
> BailingType -> /@WrappingKind
> BailingWhen (no mapping)
>> Binding -> AdhesiveBinding, ChannelBinding, CoilBinding,
> EndSheetGluing, LongitudinalRibbonOperations, RingBinding, StripBinding, or
> WireCombBinding
> BindingReferenceEdge -> /*Params/HoldMakingParams/@HoldReferenceEdge
> BindingType -> determines which class (we'll need to break this out
> for each type)
>> Coating -> no mapping?
> CoatingSides
> CoatingType
>> Covering -> CoverApplication
> CoveringName -> /Component(Cover)
>> Folding -> Folding/Fold
> FoldingDirection -> /@To
> FoldingOffset -> /@Travel
> FoldingReferenceEdge -> /@From (this will require some
> calculation since all folds are from the top or left in JDF)
>> Laminating -> Laminating
> LaminatingSides -> /Component/@Side
> LaminatingType -> /@Media
>> Punching -> HoleMaking/HoleMakingParams
> PunchingLocations /@Hole
> PunchingOffset /@Center
> PunchingReferenceEdge /@HoleReferenceEdge
>> Trimming -> Cutting/Cut or Perforating/
> TrimmingOffset -> /@StartPosition
> TrimmingReferenceEdge /@WorkingPath
> TrimmingType /@CutWidth (not sure)
> TrimmingWhen (no mapping)
> _______________________________________________
> sm3 mailing list
>sm3 at pwg.org>https://www.pwg.org/mailman/listinfo/sm3
_________________________________________________________
Michael Sweet, Senior Printing System Engineer, PWG Chair