The following are the highlights of today’s JDFMAP meeting (7:30 AM – 9:00 AM PT == 10:30 AM – 12:00 PM ET), July 21, 2014. Detailed meeting notes to follow:
Attendees:
--------------
Bill Wagner
Ira McDonald (High North)
Paul Tykodi (TCS)
Rainer Prosi (Heidelberg)
Daniel Manchala (Xerox)
Rick Yardumian (Canon)
Ira made the roll call and the Intellectual Property statement.
Looked at the 4 June 2014 version of the mapping document: wd-smjdfmap10-20140604.docx
There is a bug in the PWG Job Ticket that needs to be fixed in Print Job Schema. See lines 289-294 of the JDFMAP mapping document.
All top level MediaType on the PWG PJT have been removed as they are subsumed under MediaCol.
Worked on the JDFMAP until “InsertSheet”. Resume on July 28, 2014 (Monday @ 7:30 AM PT == 10:30 AM ET) for our next meeting on “Media”.
Skipped the finishings mappings until later time.
Daniel.
From: ipp-bounces at pwg.org [mailto:ipp-bounces at pwg.org] On Behalf Of Ira McDonald
Sent: Saturday, July 19, 2014 3:13 PM
To: Semantic Model 3.0 Workgroup discussion list; ipp at pwg.org; Rick Yardumian; Rainer Prosi; Ira McDonald
Subject: [IPP] JDFMAP call - 10:30pm US Eastern Monday 21 July 2014
Hello,
Our next JDFMAP special call will be on Monday 21 July at
7:30-8:30 US PDT / 10:30-11:30 US EDT / 16:30-17:30 CEST
Call-in toll-free number (US/Canada): 1-866-469-3239<tel:1-866-469-3239>
Call-in toll number (US/Canada): 1-650-429-3300<tel:1-650-429-3300> (Primary)
Call-in toll number (US/Canada): 1-408-856-9570<tel:1-408-856-9570> (Backup)
Attendee Access Code: *******#
Attendee ID Code: # (empty)
NOTE: DO NOT USE the audio bridge number shown by WebEx
- instead use the regular PWG conference bridge listed above!
Topic: JDFMAP Discussions
Date: Every Monday, from Monday, July 21, 2014 to no end date
Time: 10:30 am, Eastern Daylight Time (New York, GMT-04:00)
Meeting Number: 683 505 355
Meeting Password: Printing123
-------------------------------------------------------
Meeting information
-------------------------------------------------------
1. Go to https://ieee-isto.webex.com/ieee-isto/j.php?MTID=me80ad87529b4ae33f134c1fb19354cd1
2. If requested, enter your name and email address.
3. If a password is required, enter the meeting password: Printing123
4. Click "Join".
-------------------------------------------------------
For assistance
-------------------------------------------------------
1. Go to https://ieee-isto.webex.com/ieee-isto/mc
2. On the left navigation bar, click "Support".
Agenda:
(1) PWG IP Policy and Minute Taker
- volunteer as minute taker?
(2) Review latest draft of CIP4 JDF to PWG PJT Mapping
- ftp://ftp.pwg.org/pub/pwg/sm3/wd/wd-smjdfmap10-20140604-rev.pdf
- PDF of revisions with line numbers
- ftp://ftp.pwg.org/pub/pwg/sm3/wd/wd-smjdfmap10-20140604-rev.docx
- MS Word source of revisions with line numbers
Rainer - *please* do any updates with "Track Changes" enabled in
the MS Word source (with a changed date suffix in filename), both
new revisions and new comments, and send to Rick & Ira - thank you!
(3) Review Mike Sweet's Finishings mappings
- http://ftp.pwg.org/pub/pwg/ipp/minutes/ippv2-concall-minutes-20140616.pdf
- see below for Mike's original Finishings mappings proposal
(4) Next steps
- JDFMAP special call on Monday 28 July
- SM WG session at PWG F2F on Wednesday 13 August
- JDFMAP special call on Monday 18 August
Cheers,
- Ira and Rick (co-editors of JDFMAP spec)
-----------------------------------------------
- Mike's original Finishings mappings proposal on Monday 9 June
Bailing -> Wrapping/WrappingParams
BailingType -> /@WrappingKind
BailingWhen (no mapping)
Binding -> AdhesiveBinding, ChannelBinding, CoilBinding, EndSheetGluing, LongitudinalRibbonOperations, RingBinding, StripBinding, or WireCombBinding
BindingReferenceEdge -> /*Params/HoldMakingParams/@HoldReferenceEdge
BindingType -> determines which class (we'll need to break this out for each type)
Coating -> no mapping?
CoatingSides
CoatingType
Covering -> CoverApplication
CoveringName -> /Component(Cover)
Folding -> Folding/Fold
FoldingDirection -> /@To
FoldingOffset -> /@Travel
FoldingReferenceEdge -> /@From (this will require some calculation since all folds are from the top or left in JDF)
Laminating -> Laminating
LaminatingSides -> /Component/@Side
LaminatingType -> /@Media
Punching -> HoleMaking/HoleMakingParams
PunchingLocations /@Hole
PunchingOffset /@Center
PunchingReferenceEdge /@HoleReferenceEdge
Trimming -> Cutting/Cut or Perforating/
TrimmingOffset -> /@StartPosition
TrimmingReferenceEdge /@WorkingPath
TrimmingType /@CutWidth (not sure)
TrimmingWhen (no mapping)