WIMS> CIM - Posted two Alert classes (17 July 2007)

WIMS> CIM - Posted two Alert classes (17 July 2007)

WIMS> CIM - Posted two Alert classes (17 July 2007)

McDonald, Ira imcdonald at sharplabs.com
Tue Jul 17 18:16:53 EDT 2007


Hi folks,                                         Tuesday (17 July 2007)

[ Based on extensive comments from John Crandall (CIM Core co-chair) -
major rewrites of every previously modelled CIM Print Subunit class ]

[For review in upcoming WIMS-CIM telecons and WIMS WG mailing list and ]
[for future WIMS-CIM Phase 2 CR input to DMTF CIM Core WG.]

I've just posted two CIM printing classes to:

  ftp://ftp.pwg.org/pub/pwg/wims/cim/mofinput/ira-20070717.zip

    rel_0717.txt
    - this release note
    CIM_PrintAlertLog.mof
    - NEW version - prtAlertTable translation
    CIM_PrintAlertRecord.mof
    - NEW version - prtAlertEntry translation

Rick - please run mofpretty on these classes and post result to:

  ftp://ftp.pwg.org/pub/pwg/wims/cim/mofoutput/


Cheers,
- Ira


Ira McDonald (Musician / Software Architect)
Chair - Linux Foundation Open Printing WG
Blue Roof Music / High North Inc
PO Box 221  Grand Marais, MI  49839
phone: +1-906-494-2434
email: imcdonald at sharplabs.com
------------------------------------------------------------------------

Change Log:

(CIM_PrintAlertLog)
- Added note on cardinality, Printer, and UseOfLog to class Description,
  per John Crandall and CIM Core WG
- Added reference to model in section 2 of Printer MIB to class
  Description clause - also section 3 of Finisher MIB,
  per John Crandall and CIM Core WG
- Added MappingStrings clause after class Description,
  per 'any' usage for Mapping Strings in CIM Model v2.3 spec

(CIM_PrintAlertRecord)
- Added note on cardinality and PrinterComponent to class Description,
  per John Crandall and CIM Core WG
- Added reference to model in section 2 of Printer MIB to class
  Description clause - also section 3 of Finisher MIB,
  per John Crandall and CIM Core WG
- Added MappingStrings clause after class Description,
  per 'any' usage for Mapping Strings in CIM Model v2.3 spec
- Changed 'printer' to 'Printer' (class name) in all Descriptions,
  per John Crandall and CIM Core WG
- Changed 'alert record' to 'PrintAlertRecord' (class name),
  per John Crandall and CIM Core WG
- Added ModelCorrespondence clause to many properties,
  per John Crandall and CIM Core WG
- Renamed "ComponentType" (prtAlertGroup) to "ComponentClassName",
  changed datatype from 'uint32' to 'string',
  and added MinLen and MaxLen clauses,
  for CIM best practice
- Deleted "OtherComponentTypeDescription" (now redundant),
  for CIM best practice
- Added "ComponentElementName" (value of ManagedSystemElement.Name),
  per discussion with Rick Landau;
- Revised Description clauses of "SeverityLevel" and "TrainingLevel"
  to specify exact meanings for each enumerated value (original text
  from Printer MIB was circular and ambiguous in places),
  for CIM best practice
- Added "OtherSeverityLevel" and "OtherTrainingLevel",
  for CIM best practice

------------------------------------------------------------------------

No virus found in this outgoing message.
Checked by AVG Free Edition. 
Version: 7.5.476 / Virus Database: 269.10.8/904 - Release Date: 7/16/2007 5:42 PM
 




More information about the Wims mailing list