Unfortunately, I know of existing implementations for these keywords, so I don't think changing them to use "-fault" at the end is feasible. And at least for all of the media feed keywords the "-error" suffix is likely OK - feed errors generally require user interaction, so typically the printer will be in the stopped state, meeting the requirements of RFC 2911.
An alternative is to add definitions of 'fax-modem-protocol-warning' and 'fax-modem-protocol-report' and make the other keywords exclusively report errors that stop the printer. The IANA registration could just be for 'fax-modem-protocol' to match the other "printer-state-reasons" registrations.
On Mar 17, 2014, at 4:45 PM, Ira McDonald <blueroofmusic at gmail.com> wrote:
> Hi Mike,
>> I suggest that we replace "-error" with "-fault" in all of these printer state
>> If the current "-error" suffix is simply removed, the meaning of these alerts
> is lost.
>> BTW - normally, we couldn't change these names in the PrtAlertCodeTC
> textual convention in the IANA Printer MIB, because it's illegal under SMIv2
> rules to change the name of an already assigned enumeration value.
>> HOWEVER - *none* of the PWG 5107.3 section 9.2 updates for PrtAlertCodeTC
> were ever registered with IANA - this fell through the cracks in mid-2012.
>> SUGGESTION - we revise/update PWG 5107.3 and change the IPP and
> IANA Printer MIB names from "-error" to "-fault" (or "Error" to "Fault" in the
> MIB) and correct or submit the IANA IPP and MIB registrations.
> - Ira
>>>> Ira McDonald (Musician / Software Architect)
> Co-Chair - TCG Trusted Mobility Solutions WG
> Chair - Linux Foundation Open Printing WG
> Secretary - IEEE-ISTO Printer Working Group
> Co-Chair - IEEE-ISTO PWG Internet Printing Protocol WG
> IETF Designated Expert - IPP & Printer MIB
> Blue Roof Music / High North Inc
>http://sites.google.com/site/blueroofmusic>http://sites.google.com/site/highnorthinc> mailto: blueroofmusic at gmail.com> Winter 579 Park Place Saline, MI 48176 734-944-0094
> Summer PO Box 221 Grand Marais, MI 49839 906-494-2434
>>>> On Mon, Mar 17, 2014 at 2:07 PM, Michael Sweet <msweet at apple.com> wrote:
>> It was recently pointed out to me that PWG 5107.3 defines several "printer-state-reasons" keywords with the suffix "-error":
>> However, RFC 2911 reserves this suffix for indicating the severity of the reason:
>> 4.4.12 printer-state-reasons (1setOf type2 keyword)
>> This REQUIRED Printer attribute supplies additional detail about the
> device's state. Some of the these value definitions indicate
> conformance requirements; the rest are OPTIONAL.
>> Each keyword value MAY have a suffix to indicate its level of
> severity. The three levels are: report (least severe), warning, and
> error (most severe).
>> - '-report': This suffix indicates that the reason is a "report".
> An implementation may choose to omit some or all reports. Some
> reports specify finer granularity about the printer state;
> others serve as a precursor to a warning. A report MUST contain
> nothing that could affect the printed output.
> - '-warning': This suffix indicates that the reason is a
> "warning". An implementation may choose to omit some or all
> warnings. Warnings serve as a precursor to an error. A warning
> MUST contain nothing that prevents a job from completing, though
> in some cases the output may be of lower quality.
> - '-error': This suffix indicates that the reason is an "error".
> An implementation MUST include all errors. If this attribute
> contains one or more errors, printer MUST be in the stopped
>> If the implementation does not add any one of the three suffixes, all
> parties MUST assume that the reason is an "error".
>> Since an IPP Printer MAY report any of the above keywords when the Printer is not in the stopped state, I propose we add an informative note to table 3 saying something like the following:
>> Note 1: Section 4.4.12 [RFC2911] requires that the Printer is in the
> stopped state when reporting "printer-state-reasons" values ending
> with "-error". Printers MUST append a suffix of "-report" or
> "warning" to this keyword when the Printer is not in the stopped
>> I'm not sure if we want to clarify that the "job-state-reasons" attribute only contains the registered values without added suffixes.
> Michael Sweet, Senior Printing System Engineer, PWG Chair
> wims mailing list
>wims at pwg.org>https://www.pwg.org/mailman/listinfo/wims>>
Michael Sweet, Senior Printing System Engineer, PWG Chair
-------------- next part --------------
An HTML attachment was scrubbed...
-------------- next part --------------
A non-text attachment was scrubbed...
Size: 4881 bytes
Desc: not available