Gail and Rick,
Here are some minor comments on the Draft 12:
1. The new paragraph added to section 6 is good to have:
"A Sender MUST NOT use any OPTIONAL feature in PDFax unless it first queries
the Receiver to confirm that the Receiver supports the feature. If the
feature is not supported in the Receiver then the Sender MUST NOT use the
OPTIONAL feature. A Sender MUST NOT use any feature that is prohibited in
PDFax [ifx-pdfax] specification."
1a. However, it would be better to put it in the Conformance Section 15 or
somewhere else. The conformance section 15 needs to make reference to it.
1b. Section 1.1, point number 1 isn't as strong as your new paragraph:
"1. Get-Printer-Attributes - Sender MUST verify that the Printer object is
an (IPPFAX) Receiver and SHOULD determine some of the Receiver's basic
capabilities, such as PDFax profiles supported."
This paragraph only says SHOULD, but paragraph 2:
"2. Validate-Job - Sender MUST verify that the Receiver can support the Job
attributes that the Sender will send in the IPPFAX Job."
requires that the Sender do a Validate-Job in order to ensure that
unsupported attributes are not being submitted.
2. The keywords in the new table 5 and 6 need to be made all lower case and
use hyphens between words to follow IPP keyword rules.
I'll try calling in during the 1-3 PM CST time as well.
Thanks for setting up the call-in.
Tom
-----Original Message-----
From: Gail Songer [mailto:gsonger at peerless.com]
Sent: Thursday, October 24, 2002 11:08
To: ifx at pwg.org
Subject: IFX> A new revision of the IPPFax specification is ready.
The corresponding changes to the ifx-spec are now available:
ftp://ftp.pwg.org/pub/pwg/QUALDOCS/ifx-spec-12-rev.pdfftp://ftp.pwg.org/pub/pwg/QUALDOCS/ifx-spec-12-rev.doc
Gail
|---------+---------------------------->
| | "Rick Seeler" |
| | <rseeler at adobe.co|
| | m> |
| | Sent by: |
| | owner-ifx at pwg.org|
| | |
| | |
| | 10/23/2002 10:59 |
| | AM |
| | |
|---------+---------------------------->
>---------------------------------------------------------------------------
---------------------------------------------------|
|
| | To: <ifx at pwg.org>
| | cc:
| | Subject: IFX> A new revision of the PDFax specification is ready.
|
>---------------------------------------------------------------------------
---------------------------------------------------|
IPPFAX people,
Here is revision 0.2 of the PDFax specification. This will be the
revision that we will review in New Orleans next month. Please note the
'issues' with PDFax in section 5 of this document, they will be
discussed in New Orleans.
ftp://pwg.org/pub/pwg/QUALDOCS/pdfax-spec-02.pdf
For the version noting the changes from 0.1 --
ftp://pwg.org/pub/pwg/QUALDOCS/pdfax-spec-02-rev.pdf
Thanks for everyone's help.
-Rick Seeler
-Adobe Systems