IPP> MED - Definition of 'stationery-coated' Media Type for u se by ink jet and bubble jet printers

IPP> MED - Definition of 'stationery-coated' Media Type for u se by ink jet and bubble jet printers

don at lexmark.com don at lexmark.com
Tue May 1 07:52:45 EDT 2001



.... forgot to hit "Reply All"

Don

---------------------- Forwarded by Don Wright/Lex/Lexmark on 05/01/2001 07:52
AM ---------------------------


Don Wright
05/01/2001 07:51 AM

To:   "Hastings, Tom N" <hastings%cp10.es.xerox.com at interlock.lexmark.com> @
      LEXMTA
cc:
Subject:  RE: IPP> MED - Definition of 'stationery-coated' Media Type for u se
      by ink jet and bubble jet printers  (Document link: Don Wright)

We decided in Portland NOT to provide infinite levels of details about all the
possible variations of things like coated stationery.  Let's leave it at that.
The gory details should be left for the more complete future XML description
project.

**********************************************
* Don Wright                 don at lexmark.com *
* Chair, Printer Working Group               *
* Chair, IEEE MSC                            *
*                                            *
* Director, Alliances and Standards          *
* Lexmark International                      *
* 740 New Circle Rd C14/082-3                *
* Lexington, Ky 40550                        *
* 859-825-4808 (phone) 603-963-8352 (fax)    *
**********************************************


"Hastings, Tom N" <hastings%cp10.es.xerox.com at interlock.lexmark.com> on
04/30/2001 06:40:50 PM

To:   Mike Bartman <bartman%process.com at interlock.lexmark.com>
cc:   "ipp (E-mail)" <ipp%pwg.org at interlock.lexmark.com> (bcc: Don
      Wright/Lex/Lexmark)
Subject:  RE: IPP> MED - Definition of 'stationery-coated' Media Type for u se
      by ink jet and bubble jet printers



Mike,

One possible solution is that we leave 'stationery-coated' in the standard
as being generic, i.e., for an unspecified dpi.  Then we could add
additional 'stationery-coated-xxx' names where xxx is more specific.

The question is what would we be specifying in the xxx?  Would it be dpi?

So would we have the following Media Type Names:

'stationery-coated'
Separately cut sheets of an opaque material whose coating is designed for
use in ink jet printers for an unspecified resolution.

'stationery-coated-normal'
Separately cut sheets of an opaque material whose coating is designed for
use in ink jet printers for normal resolution, in the neighborhood of 300
dpi.

'stationery-coated-high'
Separately cut sheets of an opaque material whose coating is designed for
use in ink jet printers for high resolution, in the neighborhood of 600 dpi.

What about much higher resolutions than 600?  Can the same paper be used?

Another possibility is to leave out 'stationery-coated' and just have the
two new ones.

Comments?

Tom


-----Original Message-----
From: Mike Bartman [mailto:bartman at process.com]
Sent: Monday, April 30, 2001 07:08
To: 'don at lexmark.com'; Hastings, Tom N
Cc: ipp (E-mail)
Subject: RE: IPP> MED - Definition of 'stationery-coated' Media Type for
u se by ink jet and bubble jet printers


Just butting in to note that there are more than one way to coat paper for
ink-jets (and yes, I think "Bubble-Jet" is a Cannon trademark...it's
certainly the name of the their ink jet printers).  I have Epson printers
and they use two different types of paper...one for 360 dpi printing, and
one for 720 dpi.  The coatings are different for the two resolutions, as the
"bleed rate" of the ink needs to be different for the different dot sizes
used by the two resolutions.  I don't know that you can get away with a
single "ink jet coating" name even now for this reason, and I expect that
this will become a bigger problem in future as resolutions and other factors
change.

-- Mike Bartman
   Process Software
   bartman at process.com
   301-838-0071


> -----Original Message-----
> From: don at lexmark.com [mailto:don at lexmark.com]
> Sent: Saturday, April 28, 2001 1:30 AM
> To: Hastings, Tom N
> Cc: ipp (E-mail)
> Subject: Re: IPP> MED - Definition of 'stationery-coated'
> Media Type for
> use by ink jet and bubble jet printers
>
>
>
>
> Sounds good to me.
>
> **********************************************
> * Don Wright                 don at lexmark.com *
> * Chair, Printer Working Group               *
> * Chair, IEEE MSC                            *
> *                                            *
> * Director, Strategic & Technical Alliances  *
> * Lexmark International                      *
> * 740 New Circle Rd                          *
> * Lexington, Ky 40550                        *
> * 859-232-4808 (phone) 859-232-6740 (fax)    *
> **********************************************
>
>
>
> "Hastings, Tom N"
> <hastings%cp10.es.xerox.com at interlock.lexmark.com> on
> 04/27/2001 05:58:56 PM
>
> To:   "ipp (E-mail)" <ipp%pwg.org at interlock.lexmark.com>
> cc:    (bcc: Don Wright/Lex/Lexmark)
> Subject:  IPP> MED - Definition of 'stationery-coated' Media
> Type for use by ink
>        jet and bubble jet printers
>
>
>
> While writing up the minutes of the Media standard it seemed that the
> 'stationery-coated' Media Type should mention coating, so I'd like to
> suggest that we add the phrase "whose coating is designed " to get:
>
> Separately cut sheets of an opaque material whose coating is
> designed for
> use in ink jet and bubble jet printers
>
> Ok?
>
> Thanks,
> Tom
>
>
>
>
>









More information about the Ipp mailing list