Rick,
Here is the output from my compiler.
C:\DOCUME~1\rerogers\MYDOCU~1\PROJEC~1\objects\SKELET~4.MIB(71) :
Warning 21 : Node "pwg" with OID "1.3.6.1.4.1.2699" created
C:\DOCUME~1\rerogers\MYDOCU~1\PROJEC~1\objects\SKELET~4.MIB(71) :
Warning 21 : Node "mibs" with OID "1.3.6.1.4.1.2699.1" created
C:\DOCUME~1\rerogers\MYDOCU~1\PROJEC~1\objects\SKELET~4.MIB(627) : Error
23 : Item "TruthValue" is not defined or imported
C:\DOCUME~1\rerogers\MYDOCU~1\PROJEC~1\objects\SKELET~4.MIB(684) : Error
23 : Item "TruthValue" is not defined or imported
C:\DOCUME~1\rerogers\MYDOCU~1\PROJEC~1\objects\SKELET~4.MIB(1459) :
Error 23 : Item "TruthValue" is not defined or imported
C:\DOCUME~1\rerogers\MYDOCU~1\PROJEC~1\objects\SKELET~4.MIB(1522) :
Error 23 : Item "TruthValue" is not defined or imported
C:\DOCUME~1\rerogers\MYDOCU~1\PROJEC~1\objects\SKELET~4.MIB(1811) :
Error 23 : Item "TruthValue" is not defined or imported
C:\DOCUME~1\rerogers\MYDOCU~1\PROJEC~1\objects\SKELET~4.MIB(1837) :
Error 23 : Item "TruthValue" is not defined or imported
C:\DOCUME~1\rerogers\MYDOCU~1\PROJEC~1\objects\SKELET~4.MIB(1651) :
Warning 18 : Min is greater than max
C:\DOCUME~1\rerogers\MYDOCU~1\PROJEC~1\objects\SKELET~4.MIB(1627) :
Warning 18 : Min is greater than max
2043 source lines.
6 error(s), 6 warning(s)
Compilation failed.
Done.
Regards,
Raymond Rogers
Symon Communications, Inc.
(972)543-9586
From: Richard_Landau at Dell.com [mailto:Richard_Landau at Dell.com]
Sent: Wednesday, November 21, 2007 5:00 PM
To: Raymond Rogers; pdm at pwg.org
Subject: RE: PDM> Many new files on FTP.
Thanks, Raymond. Close but still no cigar just yet.
Yes, I had removed a comment from the middle of the DefaultValue
element, but I missed the closing "-->" string. Fixed. If that's the
only remaining problem, we are in good shape.
I fixed that, and one other minor problem, and reposted the MIB files.
Please try again, and, if it compiles with no errors, break out the
(cheap) champagne.
New files: in the objects directory, as usual,
skeleton-final.mib
skeleton-final-tc.mib
skeleton-final-mib.mib
skeleton-final-names-too-long.mib
And repairs to the offending groups.
Power_v13.xml
General_v09.xml
rick
PS: Ira, if you can slip me that freely redistributable MIB compiler you
mentioned, I can catch some of these errors before I inflict them on
others.
________________________________
From: Raymond Rogers [mailto:ReRogers at SYMON.com]
Sent: Tuesday, November 20, 2007 19:31
To: Landau, Richard; pdm at pwg.org
Subject: RE: PDM> Many new files on FTP.
I Still see one problem. Below is the output from the compiler.
SKELET~4.MIB(71) : Warning 21 : Node "pwg" with OID "1.3.6.1.4.1.2699"
created
SKELET~4.MIB(71) : Warning 21 : Node "mibs" with OID
"1.3.6.1.4.1.2699.1" created
SKELET~4.MIB(516) : Error 19 : Missing "}"
SKELET~4.MIB(516) : Error 20 : Expected "::=" but found "{"
516 source lines.
2 error(s), 4 warning(s)
Compilation failed.
Done.
The DEFVAL in pdmPowerTargetState is malformed. It looks like it could
not figure out part of the XML source.
Regards,
Raymond Rogers
Symon Communications, Inc.
(972)543-9586
From: owner-pdm at pwg.org [mailto:owner-pdm at pwg.org] On Behalf Of
Richard_Landau at Dell.com
Sent: Tuesday, November 20, 2007 5:45 PM
To: pdm at pwg.org
Subject: PDM> Many new files on FTP.
All in ftp://ftp.pwg.org/pub/pwg/pdm/objects/
<ftp://ftp.pwg.org/pub/pwg/pdm/objects/>
Groups with corrections and name changes.:
DisplaySet_v14.xml formerly DisplaySetting
Alert_v05.xml
Power_v12.xml formerly PwrSt
Button_v07.xml
Fan_V10.xml previously misnamed
Please note, again, that the filename, group name, and table name, if
any, must all match.
New MIB draft, individual MIBs, long name warnings::
skeleton-final.mib
skeleton-final-tc.mib
skeleton-final-mib.mib
skeleton-final-names-too-long.mib
And ZIP archives of the whole mess
xsl-mib-translate-20071120.zip
xsl-mib-fragments-20071120.zip
This should fix many of the problems inhibiting compiling, but maybe not
quite all. Please try it and let me know the results.
Have a good Thanksgiving holiday.
rick
----------------------
Richard_Landau(at)dell(dot)com, Stds & System Mgt Architecture, CTO
Office
+1-512-728-9023, One Dell Way, RR5-3, MS RR5-09, Round Rock, TX 78682
Notice of Confidentiality: This transmission contains information that
may be confidential and that may also be privileged. Unless you are the
intended recipient of the message (or authorized to receive it for the
intended recipient) you may not copy, forward, or otherwise use it, or
disclose its contents to anyone else. If you have received this
transmission in error, please notify us immediately and delete it from
your system.
Notice of Confidentiality: This transmission contains information that may be confidential and that may also be privileged. Unless you are the intended recipient of the message (or authorized to receive it for the intended recipient) you may not copy, forward, or otherwise use it, or disclose its contents to anyone else. If you have received this transmission in error, please notify us immediately and delete it from your system.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.pwg.org/archives/pdm/attachments/20071121/c2dd6c49/attachment.html