[SM3] Fwd: constraints

[SM3] Fwd: constraints

Ira McDonald blueroofmusic at gmail.com
Mon Feb 3 23:00:19 UTC 2014


Hi all,

Please read Norbert's note below about attempting to add
JobConstraintsSupported
to ScanService schema.

Pete - or anyone else - please think about Norbert's problem.

I have to go out momentarily for the evening and cannot look at this until
this Friday
(I have TCG telecons every morning Tuesday through Thursday before the PWG
F2F sessions).

Cheers,
- Ira

Ira McDonald (Musician / Software Architect)
Co-Chair - TCG Trusted Mobility Solutions WG
Chair - Linux Foundation Open Printing WG
Secretary - IEEE-ISTO Printer Working Group
Co-Chair - IEEE-ISTO PWG Internet Printing Protocol WG
IETF Designated Expert - IPP & Printer MIB
Blue Roof Music / High North Inc
http://sites.google.com/site/blueroofmusic
http://sites.google.com/site/highnorthinc
mailto: blueroofmusic at gmail.com
Winter  579 Park Place  Saline, MI  48176  734-944-0094
Summer  PO Box 221  Grand Marais, MI 49839  906-494-2434



---------- Forwarded message ----------
From: Norbert Schade <Norbert.Schade at conexant.com>
Date: Mon, Feb 3, 2014 at 3:04 PM
Subject: constraints
To: Ira McDonald <blueroofmusic at gmail.com>


Ira,

In further preparation of the face-to-face sessions I have still have
issues with constraints; maybe I'm not using the syntax properly.



I have managed to add a JobConstraintsSupported object.

It's easy to list the two elements of the base class
ImagingDocumentProcessingCapabilities, e.g. NumberUp and have XMLSpy
validate the instance.

I am also able to add a constraint from a special Conexant schema via
vendor extension syntax.

But I'm not able to add any of the standard ScanService elements that
extend the base class above, although that is the group of elements that
would mainly comprise the constraints:




<pwg:ServiceSpecificServiceDescription>


<pwg:JobConstraintsSupported>


<pwg:JobConstraint>


<pwg:ResolverName>Constraint1</pwg:ResolverName>


<pwg:JobTicketElements>


<pwg:ImagingServiceJobTicketCapabilities>


<pwg:ImagingDocumentProcessingCapabilities>


<pwg:NumberUp>


                <pwg:AllowedValue>2</pwg:AllowedValue>


</pwg:NumberUp>


                <pwg:ColorEntry>


<pwg:AllowedValue>RGB24</pwg:AllowedValue>


</pwg:ColorEntry>


</pwg:ImagingDocumentProcessingCapabilities>


</pwg:ImagingServiceJobTicketCapabilities>


</pwg:JobTicketElements>


</pwg:JobConstraint>



</pwg:JobConstraintsSupported>



The xml above validates once I take the 3 lines for ColorEntry out.
ColorEntry is one of the standard objects of the ScanService.

Am I using the wrong syntax here?

Norbert



Norbert Schade

Systems Engineer (printing)

Imaging Solutions

Conexant Systems, Inc.

201 Jones Road

Waltham, MA 02451

U.S.A.

Tel: 1-781-370-8929

Email: norbert.schade at conexant.com



Conexant E-mail Firewall (Conexant.Com) made the following annotations
---------------------------------------------------------------------
********************** Legal Disclaimer ****************************

"This email may contain confidential and privileged material for the sole
use of the intended recipient. Any unauthorized review, use or distribution
by others is strictly prohibited. If you have received the message in
error, please advise the sender by reply email and delete the message.
Thank you."

**********************************************************************

---------------------------------------------------------------------


More information about the sm3 mailing list