[SM3] JDFMAP call - 10:30pm US Eastern Monday 21 July 2014

[SM3] JDFMAP call - 10:30pm US Eastern Monday 21 July 2014

Ira McDonald blueroofmusic at gmail.com
Sat Jul 19 22:13:25 UTC 2014


Hello,

Our next JDFMAP special call will be on Monday 21 July at
7:30-8:30 US PDT / 10:30-11:30 US EDT / 16:30-17:30 CEST

Call-in toll-free number (US/Canada): 1-866-469-3239
Call-in toll number (US/Canada): 1-650-429-3300 (Primary)
Call-in toll number (US/Canada): 1-408-856-9570 (Backup)
Attendee Access Code: *******#
Attendee ID Code: # (empty)

NOTE: DO NOT USE the audio bridge number shown by WebEx
- instead use the regular PWG conference bridge listed above!

Topic: JDFMAP Discussions
Date: Every Monday, from Monday, July 21, 2014 to no end date
Time: 10:30 am, Eastern Daylight Time (New York, GMT-04:00)
Meeting Number: 683 505 355
Meeting Password: Printing123

-------------------------------------------------------
Meeting information
-------------------------------------------------------
1. Go to
https://ieee-isto.webex.com/ieee-isto/j.php?MTID=me80ad87529b4ae33f134c1fb19354cd1

2. If requested, enter your name and email address.
3. If a password is required, enter the meeting password: Printing123
4. Click "Join".

-------------------------------------------------------
For assistance
-------------------------------------------------------
1. Go to https://ieee-isto.webex.com/ieee-isto/mc
2. On the left navigation bar, click "Support".

Agenda:

(1) PWG IP Policy and Minute Taker
- volunteer as minute taker?

(2) Review latest draft of CIP4 JDF to PWG PJT Mapping
- ftp://ftp.pwg.org/pub/pwg/sm3/wd/wd-smjdfmap10-20140604-rev.pdf
  - PDF of revisions with line numbers

- ftp://ftp.pwg.org/pub/pwg/sm3/wd/wd-smjdfmap10-20140604-rev.docx
  - MS Word source of revisions with line numbers

Rainer - *please* do any updates with "Track Changes" enabled
*in*
*the MS Word source* (with a changed date suffix in filename), both
new revisions and new comments, and send to Rick & Ira - thank you!

(3) Review Mike Sweet's Finishings mappings
- http://ftp.pwg.org/pub/pwg/ipp/minutes/ippv2-concall-minutes-20140616.pdf
- see below for Mike's original Finishings mappings proposal

(4) Next steps
- JDFMAP special call on Monday 28 July
- SM WG session at PWG F2F on Wednesday 13 August
- JDFMAP special call on Monday 18 August

Cheers,
- Ira and Rick (co-editors of JDFMAP spec)

-----------------------------------------------

- Mike's original Finishings mappings proposal on Monday 9 June

    Bailing -> Wrapping/WrappingParams
        BailingType -> /@WrappingKind
        BailingWhen (no mapping)

    Binding -> AdhesiveBinding, ChannelBinding, CoilBinding,
EndSheetGluing, LongitudinalRibbonOperations, RingBinding, StripBinding, or
WireCombBinding
        BindingReferenceEdge -> /*Params/HoldMakingParams/@HoldReferenceEdge
        BindingType -> determines which class (we'll need to break this out
for each type)

    Coating -> no mapping?
        CoatingSides
        CoatingType

    Covering -> CoverApplication
        CoveringName -> /Component(Cover)

    Folding -> Folding/Fold
        FoldingDirection -> /@To
        FoldingOffset -> /@Travel
        FoldingReferenceEdge -> /@From   (this will require some
calculation since all folds are from the top or left in JDF)

    Laminating -> Laminating
        LaminatingSides -> /Component/@Side
        LaminatingType -> /@Media

    Punching -> HoleMaking/HoleMakingParams
        PunchingLocations /@Hole
        PunchingOffset /@Center
        PunchingReferenceEdge /@HoleReferenceEdge

    Trimming -> Cutting/Cut or Perforating/
        TrimmingOffset -> /@StartPosition
        TrimmingReferenceEdge /@WorkingPath
        TrimmingType /@CutWidth (not sure)
        TrimmingWhen (no mapping)


More information about the sm3 mailing list