From: Richard_Landau@Dell.com
Date: Wed Nov 28 2007 - 10:30:01 EST
Thanks, Ron. I'll take a look, too.
rick
-----Original Message-----
From: Ron.Bergman@ricoh-usa.com [mailto:Ron.Bergman@ricoh-usa.com]
Sent: Tuesday, November 27, 2007 19:33
To: Landau, Richard
Cc: owner-pdm@pwg.org; pdm@pwg.org
Subject: RE: PDM> New draft MIB files on FTP.
Rick,
I have isolated the problem to the PDM-TC MIB. I'll try to look some
more tomorrow to determine why.
Ron
<Richard_Landau@D
ell.com>
To
11/27/2007 02:02 <Ron.Bergman@ricoh-usa.com>
PM
cc
<owner-pdm@pwg.org>,
<pdm@pwg.org>
Subject
RE: PDM> New draft MIB files on
FTP.
Ron, this sounds bad, if your software can browse all MIBs with tables
*except* the PDM MIB. What is it about our table structure that is so
funky that it hangs the software? Can you please poke around in the PDM
MIB, which doesn't work, and some other MIBs that do work, to see if
there is any understandable difference? It is entirely possible that
our tables are not defined just so.
Any help would be appreciated, thanks.
rick
-----Original Message-----
From: Ron.Bergman@ricoh-usa.com [mailto:Ron.Bergman@ricoh-usa.com]
Sent: Monday, November 26, 2007 18:33
To: Landau, Richard
Cc: owner-pdm@pwg.org; pdm@pwg.org
Subject: RE: PDM> New draft MIB files on FTP.
No, I am not trying to read the tables. Only looking at the MIB
structure in the browser. This is where the desired objects are
selected to be monitored. I am able to see the structure of all the
MIBs I have compiled, except the pdm.
Ron
<Richard_Landau@D
ell.com>
To
11/26/2007 04:27 <Ron.Bergman@ricoh-usa.com>
PM
cc
<owner-pdm@pwg.org>,
<pdm@pwg.org>
Subject
RE: PDM> New draft MIB files on
FTP.
Again, thanks, Ron. But what browser hangs up on what tables? I don't
understand. Do you have something that really instantiates the MIB and
a browser that wants to look at it? With no underlying database, all
the tables should be empty.
rick
----Original Message-----
From: Ron.Bergman@ricoh-usa.com [mailto:Ron.Bergman@ricoh-usa.com]
Sent: Monday, November 26, 2007 18:24
To: Landau, Richard
Cc: owner-pdm@pwg.org; pdm@pwg.org
Subject: RE: PDM> New draft MIB files on FTP.
Without the plus sign it compiles.
I assume the message is an error, since it does not complete the
compile.
When I comment out the range, the compile completes.
After the compile is complete the browser hangs up on many of the
tables.
Example, if I try to open the pdmGeneral table. I have tried all, but
most seem to have this characteristic.
Ron
<Richard_Landau@D
ell.com>
To
11/26/2007 04:12 <Ron.Bergman@ricoh-usa.com>
PM
cc
<owner-pdm@pwg.org>,
<pdm@pwg.org>
Subject
RE: PDM> New draft MIB files on
FTP.
Thanks, Ron. Still no cigar, eh?
- On the ...Sharpness range, is it the plus sign that it is objecting
to? I wondered about that myself. Please try editing that out and see.
I will nuke it in the XML.
- On the Locale... ones, is it giving an error or a warning? Failure to
specify probably shouldn't be an error unless the SMI specs really say
SHALL. I'll check.
rick
-----Original Message-----
From: Ron.Bergman@ricoh-usa.com [mailto:Ron.Bergman@ricoh-usa.com]
Sent: Monday, November 26, 2007 18:05
To: Landau, Richard
Cc: owner-pdm@pwg.org; pdm@pwg.org
Subject: Re: PDM> New draft MIB files on FTP.
My complier indicates "invalid size/range specified for ..."
pdmDisplaySetSharpness,
pdmLocaleCharsetEnumEWS,
pdmLocaleCharsetEnum.
Ron Bergman
Ricoh Americas Corporation
<Richard_Landau@D
ell.com>
Sent by:
To
owner-pdm@pwg.org <pdm@pwg.org>
cc
11/26/2007 02:24
Subject
PM PDM> New draft MIB files on FTP.
I updated, on ftp://ftp.pwg.org/pub/pwg/pdm/objects/
skeleton-final.mib
skeleton-final-mib.mib
skeleton-final-tc.mib
skeleton-final-names-too-long.txt
Please try again to compile the beast and let me know the results.
rick
----------------------
Richard_Landau(at)dell(dot)com, Stds & System Mgt Architecture, CTO
Office
+1-512-728-9023, One Dell Way, RR5-3, MS RR5-09, Round Rock, TX 78682
This archive was generated by hypermail 2.1.4 : Wed Nov 28 2007 - 10:32:28 EST