Can't it be simple?
If the topic pertains to one DL... copy only that DL.
If the topic pertains primarily to one DL but may also pertain to multiple
DLs... send to the primary DL and, in addition, to PWG.org
If the topic pertains to multiple DLs with no particular primary... just
send to PWG.org
----------------------------------------------
Harry Lewis
IBM Printing Systems
----------------------------------------------
"Hastings, Tom N" <hastings@cp10.es.xerox.com>
Sent by: owner-pwg@pwg.org
04/18/2001 12:44 AM
To: don@lexmark.com
cc: "pwg (E-mail)" <pwg@pwg.org>
Subject: PWG> ISSUE: Sending a mail message to multiple DLs on the PWG server
Don,
Maybe we can discuss sending mail to multiple DLs at the PWG meeting of
what
to do when a message affect multiple PWG standards activities. Is the PWG
DL sufficiently broad to cover a number of DLs? For example, how many of
the IPP members are also PWG members? How many PMP members are also PWG
members? How many UPD members are also PWG members?
Or we could send one message to PWG Announce, with an indication of which
DL
to carry on replies. But this would be too broad, since PWG Announce gets
to all PWG DLs.
BTW,
I used to get a separate copy of each message for each DL with the
appropriate XXX> prefix on the subject line. Recently, I'm only getting
one
XXX> prefix but still a copy to each DL. Did you change something on the
PWG server?
I use Outlook, so I set up filters to filter into separate folders for
each
DL, so I don't mind getting duplicates. However, for those who read all
their incoming mail as a single thread, it would be a pain to get
duplicates, especially now that the XXX> prefix on the subject line is
fixed
at only of the DLs for all copies.
Thanks,
Tom
-----Original Message-----
From: don@lexmark.com [mailto:don@lexmark.com]
Sent: Monday, April 16, 2001 12:08
To: Hastings, Tom N
Subject: Re: IPP> RE: PWG> Question about Localization
Please resist the urge to copy multiple mailing lists. Pick the most
appropriate one and be done with it.
**********************************************
* Don Wright don@lexmark.com *
* Chair, Printer Working Group *
* Chair, IEEE MSC *
* *
* Director, Alliances & Standards *
* Lexmark International *
* 740 New Circle Rd *
* Lexington, Ky 40550 *
* 859-825-4808 (phone) 603-963-8352 (fax) *
**********************************************
"Hastings, Tom N" <hastings%cp10.es.xerox.com@interlock.lexmark.com> on
04/16/2001 02:56:01 PM
To: Ray Casterline
<RayCasterline%lhsolutions.com@interlock.lexmark.com>,
pwg%pwg.org@interlock.lexmark.com
cc: "ipp (E-mail)" <ipp%pwg.org@interlock.lexmark.com>, "pmp (E-mail)"
<pmp%pwg.org@interlock.lexmark.com> (bcc: Don Wright/Lex/Lexmark)
Subject: IPP> RE: PWG> Question about Localization
Ray,
You should look at RFC 2569, entitled: "Mapping between LPD and IPP
Protocols". IPP (RFC 2911) has a lot of character set and localization
semantics in it, so those semantics may help in understanding how they
might
apply to LPD using the mapping semantics. (I have not studied RFC 259
from
this perspective). I suspect that RFC 1179 which attempted to document
LPD
practice didn't go into such areas.
There is also RFC 2708 "Job Submission Protocol Mapping Recommendations
for
the Job Monitoring MIB" that deals with mapping job attributes of PServer
and RPrinter to the PWG Job Monitoring MIB (RFC 2707), that might also
help.
The PWG Job Monitoring MIB had localization and character set support in
it.
If you find that these documents are insufficient to answer your
questions,
please post the questions again to these lists, since such documents
should
include character and localization considerations.
Thanks,
Tom
-----Original Message-----
From: Ray Casterline [mailto:RayCasterline@lhsolutions.com]
Sent: Monday, April 09, 2001 14:31
To: pwg@pwg.org
Subject: PWG> Question about Localization
Hello,
I had some questions with regards to localization
specifically for PServer, RPrinter and LPD.
The questions are as follows:
Character set/encoding supported?
Character set identification?
Character set negotiation?
Character Transformation encoding?
Specifically in regards to:
Path name,
User name,
Domain name,
Host name,
Queue name,
Printer name,
Print server name,
Repository name
Does anyone know of any RFC's or other documents that
I can get access to that would help me resolve these
questions?
Thanks in advance for any and all help.
Best Regards,
Ray Casterline
Principle Lighthouse Solutions, LLC
716.218.9910 - voice 2604 Elmwood Ave., #346
716.218.9913 - fax Rochester, NY 14618
This archive was generated by hypermail 2b29 : Wed Apr 18 2001 - 16:58:46 EDT