The V1 spec is ready to send to the IETF as an Internet-Draft and request
the IESG to publish as an Informational RFC. As agreed, we will call this
V1.0, not V1.3, even though the PWG has had an older version that we called
V1.0 in February and made it an Internet-Draft
(draft-ietf-printmib-job-monitor-07.txt). The V1.0 spec does not have
either the Mirror Table or the System Table.
The V2 spec has the OPTIONAL Mirror Table and the MANDATORY System Table
that shows which attributes are supported and how. We should hold off on
making V2 and Internet-Draft so as not to confuse the IETF.
The V1 files are available at:
ftp://ftp.pwg.org/pub/pwg/jmp/mibs/version1/jmp-mib-1.0.docftp://ftp.pwg.org/pub/pwg/jmp/mibs/version1/jmp-mib-1.0.pdfftp://ftp.pwg.org/pub/pwg/jmp/mibs/version1/jmp-mib-1.0-rev.docftp://ftp.pwg.org/pub/pwg/jmp/mibs/version1/jmp-mib-1.0-rev.pdfftp://ftp.pwg.org/pub/pwg/jmp/mibs/version1/jmp-mib-1.0.mibftp://ftp.pwg.org/pub/pwg/jmp/mibs/version1/jmp.dicftp://ftp.pwg.org/pub/pwg/jmp/mibs/version1/jmp-mib-1.0.txtftp://ftp.pwg.org/pub/pwg/jmp/mibs/version1/draft-ietf-printmib-job-monitor-
08.txt
ftp://ftp.pwg.org/pub/pwg/jmp/internet-drafts/draft-ietf-printmib-job-monito
r-08.txt
The V2 files are available at:
ftp://ftp.pwg.org/pub/pwg/jmp/mibs/version2/jmp-mib-2.0.docftp://ftp.pwg.org/pub/pwg/jmp/mibs/version2/jmp-mib-2.0.pdfftp://ftp.pwg.org/pub/pwg/jmp/mibs/version2/jmp-mib-2.0-rev.docftp://ftp.pwg.org/pub/pwg/jmp/mibs/version2/jmp-mib-2.0-rev.pdfftp://ftp.pwg.org/pub/pwg/jmp/mibs/version2/jmp-mib-2.0.mibftp://ftp.pwg.org/pub/pwg/jmp/mibs/version1/jmp.dicftp://ftp.pwg.org/pub/pwg/jmp/mibs/version2/jmp-mib-2.0.txt
Both V1 and V2 compile with three compilers.
Here is the change history for V1:
10.1 Changes to produce version 1.0, dated February 19, 1999
The following changes were made to version 1.2, dated October 2, 1998 to
make version 1.0 [sic], dated January 28, 1999:
1. Changed the version number back to 1.0 for this INTERNET-DRAFT in
anticipation of its being published as an Information RFC.
10.2 Changes to produce version 1.2, dated October 2, 1998
The following changes were made to version 1.1, dated October 1, 1998 to
make version 1.2, dated October 2, 1998:
1. Removed all REFERENCE clauses since they referred to sections in the
specification that were not in the MIB as requested by the IESG.
2. Moved the definitions of the attributes from the TC to a new section
3.3.8 as requested by the IESG.
3. Removed the attributes from the Table of Contents
4. Added the data types as ASN.1 comments after each attribute enum.
5. Changed a number of occurrences of "SHALL" to "is" when they were
just definitions, rather than conformance requirements.
1.3 Changes to produce version 1.1, dated October 1, 1998
The following changes were made to version 1.0, dated February 3, 1998 to
make version 1.1, dated October 1, 1998:
1. Clarified sections 3.3.3 and 3.3.7 so that the DEFVAL of 0 for index
attributes is different from the DEFVAL for jmAttributeValueAsInteger which
is -2.
2. Clarified the relationships of the values of the
JmJobCollationTypeTC with the IPP "multiple-document-handling" attribute.
3. Clarified that the values of the mediumRequested(170) and
mediumConsumed(171) attributes may be any of the IPP 'media' values which
are media names, media size names, and input tray names.
4. Added the two attributes approved by the PWG for registration in
April 1998: mediumTypeConsumed(174) and mediumSizeConsumed(175).
5. Changed "insure" to "ensure'.
6. Correct an incorrect reference in the jmAttributeEntry DESCRIPTION
from jmJobTable to jmAttributeTable.
Here is the change history for V2:
1.1 Changes to produce version 2.0, dated February 20, 1999
The following changes were made to version 1.2, dated October 2, 1998 to
make version 2.0, dated February 20, 1999:
1. Added the Mirror table.
2. Moved the JmJobSubmissionIDTypeTC, JmJobStateReasons1TC,
JmJobStateReasons2TC, JmJobStateReasons3TC, and JmJobStateReasons4TC
assignments out of the MIB and into the Introduction.
3. Added the MANDATORY jmSystemGroup that contains the
jmSystemVersionString, jmSystemOptionSupport, jmSystemAttrIntegerSupport,
jmSystemAttrOctetsSupport, and jmSystemAttrMultiRowSupport objects.
4. Changed the version number to 2.0, since a MANDATORY table was
added.
Tom Hastings
(310) 333-6413