Greetings,
HP Inc. requests the registration of the following 5 IPP attributes:
Job Template attributes: Reference
------------------------------- ---------
pclm-source-resolution (resolution) [WiFiDirectPrint]
Printer Description attributes: Reference
------------------------------- ---------
pclm-raster-back-side (keyword) [WiFiDirectPrint]
pclm-source-resolution-supported (1setOf resolution) [WiFiDirectPrint]
pclm-strip-height-preferred (1setOf integer) [WiFiDirectPrint]
pclm-strip-height-supported (integer) [WiFiDirectPrint]
Attributes (attribute syntax)
Keyword Attribute Value Reference
------------------------------- ---------
pclm-raster-back-side (keyword) [WiFiDirectPrint]
normal [WiFiDirectPrint]
rotated [WiFiDirectPrint]
flipped [WiFiDirectPrint]
[WiFiDirectPrint] - Wi-Fi Alliance, "Wi-Fi Peer-to-Peer Services Print (P2Ps-Print) Technical Specification Version 1.1", https://www.wi-fi.org/file/wi-fi-peer-to-peer-services-technical-specification-package-v12
Here are the backing definitions:
Job Template Attributes:
---------------------------------
3.12.8 pclm-source-resolution (resolution)
This attribute specifies the source resolution of the PCLm Document
for the Job.
Printer Description Attributes
---------------------------------
3.12.4 pclm-raster-back-side (keyword)
This attribute specifies the bitmap coordinate system for the back
side of duplex sheets and the following keyword values are defined:
+---------+------------------+-------------------+
| KEYWORD | LONG EDGE ORIGIN | SHORT EDGE ORIGIN |
+---------+------------------+-------------------+
| normal | top-left | top-left |
| rotated | bottom-right | top-left |
| flipped | bottom-left | top-right |
+---------+------------------+-------------------+
3.12.9 pclm-source-resolution-supported (1setOf resolution)
This attribute enumerates the printer’s supported source resolutions
(specific to PCLm). Specifies the resolution or range of source
resolutions supported by the printer. Typically, a printer will produce
better resolution and perform better when the source and printer
resolution are equal.
3.12.10 pclm-strip-height-preferred (integer)
This attribute specifies the Printer's preferred strip height for
Jobs that use the PCLm document format.
3.12.11 pclm-strip-height-supported (1setOf integer)
This attribute specifies the strip/swath heights that the Printer
supports. Each non-zero strip height value MUST be a power of 2 and MUST
NOT be less than 16. The strip height is specified in source space
coordinates. This attribute is only required for PCLm jobs. Strip height
is relative to page i.e. if 16 means strip height is = page length/16.
A return value of 0 indicates that the entire page should be
delivered to the printer as a single strip, e.g. strip height is equal to
the page height, resulting in a strip count of 1.
Please reply with are any questions or comments,
Smith
/**
Smith Kennedy
Wireless & Standards Architect - IPG-PPS
Standards - IEEE ISTO PWG / Bluetooth SIG / Wi-Fi Alliance / NFC Forum / USB-IF
Chair, IEEE ISTO Printer Working Group
HP Inc.
*/
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 4241 bytes
Desc: not available
URL: <http://www.pwg.org/pipermail/ipp/attachments/20180907/f37fb361/attachment.p7s>