WIMS> CIM - Posted OutputTray (25 April 2007)

WIMS> CIM - Posted OutputTray (25 April 2007)

WIMS> CIM - Posted OutputTray (25 April 2007)

Richard_Landau at Dell.com Richard_Landau at Dell.com
Wed Apr 25 18:34:14 EDT 2007


and I posted the prettified results in mofoutput

ftp://ftp.pwg.org/pub/pwg/wims/cim/mofoutput/rick-20070425.zip

Changes: 
- inheritance from CIM_LogicalElement, fixed classname.
- added a couple words to XxxBasis descriptions.
- mofpretty upcased "value" twice. 
- put back the UMLPackagePath, which mofpretty removes. 
- mofpretty also insists on adding spaces to the end of some lines.  

rick

-----Original Message-----
From: owner-wims at pwg.org [mailto:owner-wims at pwg.org] On Behalf Of
McDonald, Ira
Sent: Wednesday, April 25, 2007 15:13
To: wims at pwg.org
Subject: WIMS> CIM - Posted OutputTray (25 April 2007)

Hi folks,                                      Wednesday (25 April 2007)

                [For input to the DMTF CIM Core WG]

Based on DMTF CIM Core WG discussion on Rick's draft CR 901, my recent
discussions with Rick, and Rick's detailed discussion with Jon Hass
(Dell, co-chair CIM Core WG).

I've just posted a revised CIM_PrintOutputTray class to:

  ftp://ftp.pwg.org/pub/pwg/wims/cim/mofinput/ira-20070425.zip

    rel_0425.txt
    - this release note
    CIM_PrintOutputTray.mof
    - NEW version - prtOutputEntry translation

Rick - please run mofpretty on this class and post result to:

  ftp://ftp.pwg.org/pub/pwg/wims/cim/mofoutput/

Cheers,
- Ira


Ira McDonald (Musician / Software Architect) Chair - Linux Foundation
Open Printing WG Blue Roof Music / High North Inc PO Box 221  Grand
Marais, MI  49839
phone: +1-906-494-2434
email: imcdonald at sharplabs.com
------------------------------------------------------------------------

Change Log:

- Changed applicable CIM version to "2.16.0",
  per CIM Core WG and Jon Hass
- Changed parent from "CIM_ManagedSystemElement" to "LogicalElement",
  per CIM Core WG and Jon Hass
- Renamed "Id" (i.e., prtOutputIndex) to "SNMPRowId" and added note to
  Description to explain correlation between CIM and SNMP interfaces,
  per CIM Core WG and Jon Hass
- Renamed "OtherType" to "OtherTypeDescription",
  per CIM Core WG and Jon Hass
- Added new out-of-band values property "MaxCapacityBasis",
  per CIM Core WG and Jon Hass
- Revised limit property "MaxCapacity", changing Description,
  MinValue from '-2' to '0', and type from 'sint32' to 'uint32',
  per CIM Core WG and Jon Hass
- Added new out-of-band values property "RemainingCapacityBasis",
  per CIM Core WG and Jon Hass
- Revised gauge property "RemainingCapacity", changing Description,
  MinValue from '-3' to '0', and type from 'sint32' to 'uint32',
  per CIM Core WG and Jon Hass
- Deleted four top-level status properties "PrimaryStatus",
  "DetailedStatus", "OperatingStatus", and "CommunicationStatus"
  (now inherited from "CIM_ManagedSystemElement"),
  per CIM Core WG and Jon Hass
- Renamed four subunit status properties to make 'Status' a suffix,
  from "StatusAvailability" to "AvailabilityStatus",
  from "StatusNonCriticalAlerts" to "NonCriticalAlertsStatus",
  from "StatusCriticalAlerts" to "CriticalAlertsStatus", and
  from "StatusOffline" to "OfflineStatus",
  per CIM Core WG and Jon Hass
- Deleted one subunit status property "StatusTransitioning"
  (to be added to top-level status property "OperatingStatus"),
  per CIM Core WG and Jon Hass
- Added ModelCorrespondence clauses to "AvailabilityStatus" and
  "OfflineStatus" (to "CIM_ManagedSystemElement.OperatingStatus"),
  per CIM Core WG and Jon Hass
- Added "DMTF Reserved" to IANA-controlled enumerated properties
  ("Type", CapacityUnit", and "AvailabilityStatus") and CIM mapping
  basis properties ("MaxCapacityBasis" and "RemainingCapacityBasis"),
  to prevent incompatible vendor or site extensions,
  per CIM Core WG and Jon Hass

------------------------------------------------------------------------

No virus found in this outgoing message.
Checked by AVG Free Edition. 
Version: 7.5.463 / Virus Database: 269.6.1/776 - Release Date: 4/25/2007
12:19 PM
 




More information about the Wims mailing list