[PWG-Announce] [EXTENDED] PWG Last Call of IPP Finishings 2.0 (FIN2) (28 July 2014 to 12 September 2014)

[PWG-Announce] [EXTENDED] PWG Last Call of IPP Finishings 2.0 (FIN2) (28 July 2014 to 12 September 2014)

[PWG-Announce] [EXTENDED] PWG Last Call of IPP Finishings 2.0 (FIN2) (28 July 2014 to 12 September 2014)

Ira McDonald blueroofmusic at gmail.com
Wed Sep 10 13:53:07 UTC 2014


Hi,

We still need a few more responses to reach quorum.

Please take a few minutes to send your response by this Friday
(12 September).

Cheers,
- Ira


Ira McDonald (Musician / Software Architect)
Co-Chair - TCG Trusted Mobility Solutions WG
Chair - Linux Foundation Open Printing WG
Secretary - IEEE-ISTO Printer Working Group
Co-Chair - IEEE-ISTO PWG Internet Printing Protocol WG
IETF Designated Expert - IPP & Printer MIB
Blue Roof Music / High North Inc
http://sites.google.com/site/blueroofmusic
http://sites.google.com/site/highnorthinc
mailto: blueroofmusic at gmail.com
Winter  579 Park Place  Saline, MI  48176  734-944-0094
Summer  PO Box 221  Grand Marais, MI 49839  906-494-2434


On Sun, Aug 24, 2014 at 10:11 AM, Michael Sweet <msweet at apple.com> wrote:

> [Extended to September 12, 2014 to give some more time for people to
> respond...]
>
> All,
>
> [This PWG Last Call starts today, Monday 28 July 2014, and ends Friday, 12
> September 2014 at 10pm US Pacific.]
>
> This is the formal announcement of the PWG Last Call for the IPP
> Finishings 2.0 (FIN2) specification, located at:
>
>         http://ftp.pwg.org/pub/pwg/ipp/wd/wd-ippfinishings20-20140701.pdf
>
> All required attributes and values defined in this document have been
> prototyped by Apple and/or other vendors. The IPP WG has completed
> extensive review of the various revisions of this document and an IPP WG
> last call.
>
> The PWG Process/3.0 requires that a quorum (30%) of PWG members must
> acknowledge a PWG Last Call (with or without comments), before any document
> can progress to PWG Formal Vote.  This PWG Last Call is NOT a Formal Vote
> but it DOES require your review acknowledgment.
>
>
> HOW TO RESPOND
>
> Send an email with *exactly* the following subject line format:
> Subject: <Company Name> has reviewed the IPP Finishings 2.0 specification
> and has [no] comments
>
>
> WHERE TO SEND YOUR RESPONSE
>
> Please send your response to *all* of the following email addresses
> (replacing "dot" with '.' and "at" with '@'):
>
> ipp "at" pwg "dot" org (IPP WG mailing list - you must be subscribed!)
> blueroofmusic "at" gmail "dot" com (Ira McDonald, IPP WG Co-Chair)
> ptykodi "at" tykodi "dot" com (Paul Tykodi, IPP WG Co-Chair)
> msweet "at" apple "dot" com (Michael Sweet, IPP WG Secretary, author)
>
>
> Note that you must be subscribed to the IPP WG mailing list to send email
> there - otherwise your email will be silently discarded.
>
> Please do NOT simply reply to this note on the PWG-Announce list.
>
> Note: The PWG Definition of the Standards Development Process Version 3.0
> is located at:
>
>         http://www.pwg.org/chair/membership_docs/pwg-process30.pdf
>
> _________________________________________________________
> Michael Sweet, Senior Printing System Engineer, PWG Chair
>
> _______________________________________________
> pwg-announce mailing list
> pwg-announce at pwg.org
> https://www.pwg.org/mailman/listinfo/pwg-announce
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.pwg.org/pipermail/pwg-announce/attachments/20140910/891818b4/attachment.html>


More information about the pwg-announce mailing list