WIMS> CIM - Posted Channel/Input/Marker (9 May 2007)

WIMS> CIM - Posted Channel/Input/Marker (9 May 2007)

McDonald, Ira imcdonald at sharplabs.com
Wed May 9 14:46:50 EDT 2007


*** Revised to align with latest CIM_PrintOutputTray ***

Hi folks,                                         Wednesday (9 May 2007)

[For review in upcoming WIMS-CIM telecons and WIMS WG mailing list and ]
[for future WIMS-CIM Phase 2 CR's input to DMTF CIM Core WG.]

I've just posted three CIM printing subunit classes to:

  ftp://ftp.pwg.org/pub/pwg/wims/cim/mofinput/ira-20070509.zip

    rel_0509.txt
    - this release note
    CIM_PrintChannel.mof
    - NEW version - prtChannelEntry translation
    CIM_PrintInputTray.mof
    - NEW version - prtInputEntry translation
    CIM_PrintMarker.mof
    - NEW version - prtMarkerEntry translation

Rick - please run mofpretty on these classes and post result to:

  ftp://ftp.pwg.org/pub/pwg/wims/cim/mofoutput/

Cheers,
- Ira


Ira McDonald (Musician / Software Architect)
Chair - Linux Foundation Open Printing WG
Blue Roof Music / High North Inc
PO Box 221  Grand Marais, MI  49839
phone: +1-906-494-2434
email: imcdonald at sharplabs.com
------------------------------------------------------------------------

Change Log:

(common edits)
- Changed applicable CIM version to "2.16.0",
  per CIM Core WG and Jon Hass
- Changed parent from "CIM_ManagedSystemElement" to "LogicalElement",
  per CIM Core WG and Jon Hass
- Changed 'MUST' or 'must' to 'shall' and 'SHOULD' to 'should' in all
  Description clauses,
  per CIM Core WG and Jon Hass
- Added "DMTF Reserved" to IANA-controlled enumerated properties
  and CIM mapping basis properties,
  to prevent incompatible vendor or site extensions,
  per CIM Core WG and Jon Hass
- Renamed "Id" (i.e., prtXxxIndex) to "SNMPRowId" and added note to
  Description to explain correlation between CIM and SNMP interfaces,
  per CIM Core WG and Jon Hass
- Renamed "OtherType" to "OtherTypeDescription",
  per CIM Core WG and Jon Hass
- Deleted four top-level status properties "PrimaryStatus",
  "DetailedStatus", "OperatingStatus", and "CommunicationStatus"
  (now inherited from "CIM_ManagedSystemElement"),
  per CIM Core WG and Jon Hass
- Renamed four subunit status properties to make 'Status' a suffix,
  from "StatusAvailability" to "AvailabilityStatus",
  from "StatusNonCriticalAlerts" to "NonCriticalAlertsStatus",
  from "StatusCriticalAlerts" to "CriticalAlertsStatus", and
  from "StatusOffline" to "OfflineStatus",
  per CIM Core WG and Jon Hass
- Deleted one subunit status property "StatusTransitioning"
  (to be added to top-level status property "OperatingStatus"),
  per CIM Core WG and Jon Hass
- Added ModelCorrespondence clauses to "AvailabilityStatus" and
  "OfflineStatus" (to "CIM_ManagedSystemElement.OperatingStatus"),
  per CIM Core WG and Jon Hass

(CIM_PrintInputTray)
- Renamed "CIM_PrintInputTray.OtherType" to
  "CIM_PrintInputTray.OtherTypeDescription",
  per CIM Core WG and Jon Hass
- Added new out-of-band values property
  "CIM_PrintInputTray.MaxCapacityBasis",
  per CIM Core WG and Jon Hass
- Revised limit property "CIM_PrintInputTray.MaxCapacity",
  changing Description,
  MinValue from '-2' to '0', and type from 'sint32' to 'uint32',
  per CIM Core WG and Jon Hass
- Added new out-of-band values property
  "CIM_PrintInputTray.CurrentLevelBasis",
  per CIM Core WG and Jon Hass
- Revised gauge property "CIM_PrintInputTray.CurrentLevel",
  changing Description,
  MinValue from '-3' to '0', and type from 'sint32' to 'uint32',
  per CIM Core WG and Jon Hass
- Added new out-of-band values property
  "CIM_PrintInputTray.MediaWeightBasis",
  per CIM Core WG and Jon Hass
- Revised media property "CIM_PrintInputTray.MediaWeight",
  changing Description,
  MinValue from '-2' to '0', and type from 'sint32' to 'uint32',
  per CIM Core WG and Jon Hass
- Revised media property "CIM_PrintInputTray.MediaWeight",
  adding PUnit clause,
  per CIM Core WG and Jon Hass

(CIM_PrintMarker)
- Renamed "CIM_PrintMarker.OtherMarkTech" to
  "CIM_PrintMarker.OtherMarkTechDescription",
  per CIM Core WG and Jon Hass
- Revised ambiguous Description clauses of
  "CIM_PrintMarker.LifeCount" and "CIM_PrintMarker.PowerOnCount",
  for clarity

(CIM_PrintChannel)
- Renamed "CIM_PrintChannel.DefaultPageDescLangId" to
  "CIM_PrintChannel.DefaultPageDescLangSNMPRowId",
  per CIM Core WG and Jon Hass
- Renamed "CIM_PrintChannel.CurrentJobCntlLangId" to
  "CIM_PrintChannel.CurrentJobCntlLangSNMPRowId",
  per CIM Core WG and Jon Hass
- Renamed "CIM_PrintChannel.InterfaceId" to
  "CIM_PrintChannel.InterfaceSNMPRowId",
  per CIM Core WG and Jon Hass
- Renamed "CIM_PrintChannel.Information" to
  "CIM_PrintChannel.AuxiliaryInformation",
  for clarity

------------------------------------------------------------------------

No virus found in this outgoing message.
Checked by AVG Free Edition. 
Version: 7.5.467 / Virus Database: 269.6.6/794 - Release Date: 5/8/2007 2:23 PM
 




More information about the Wims mailing list