FIN> Description of Changes in Latest Draft

[Ron Bergman]

Here is a summary of the changes in the Finisher MIB draft that I posted
earlier today on the PWG server:


CHANGES TO THE FINISHER MIB on 9/21/98 since 8/7/98.

1.  Moved the MODULE-IDENTITY to { experimental 64 }

    Note: all the MIB objects are still in the Printer MIB tree.

2.  Added the following enums to FinStitchingTypeTC:

         stapleDualTop(10),
         stapleDualBottom(11),
         stapleDualLeft(12),
         stapleDualRight(13)

3.  Added a new attribute and textual convention:

         stitchingDirection(31),            StitchingDirTypeTC
            INTEGER:  Defines the orientation of the stitching
              process.

StitchingDirTypeTC ::= TEXTUAL-CONVENTION
-- This is a type 1 enumeration.
    STATUS       current
    DESCRIPTION
      "Defines the direction, relative to the top sheet in the output
       subunit, that the stitching operation was performed.  For a
       topDown(3) process, the staple will be clinched on the bottom
       of the stack.  This parameter can be used to determine what
       order the pages of a booklet are to be printed such that the
       staple clinch will be on the inside of the resulting booklet."
    SYNTAX       INTEGER {
         unknown(2),
         topDown(3),
         bottomUp(5)
        }

4. Removed the following note from section 6.1: 

  There are no type 1 enums in the current draft.



	Ron Bergman
	Dataproducts Corp.