[IPP] Updated text for IPP Finishings 2.1 Section 5.3 - review wordsmithing help requested

[IPP] Updated text for IPP Finishings 2.1 Section 5.3 - review wordsmithing help requested

[IPP] Updated text for IPP Finishings 2.1 Section 5.3 - review wordsmithing help requested

Kennedy, Smith (Wireless Architect) smith.kennedy at hp.com
Sun Jan 15 14:44:36 UTC 2017


I prefer Mike's version as well. I will use it as-is, and re-post an updated LCRC, unless there are any objections by end-of-day Tuesday, January 17, 2017.

Smith

/**
    Smith Kennedy
    Wireless Architect - Client Software - IPG-PPS
    Standards - IEEE ISTO PWG / Bluetooth SIG / Wi-Fi Alliance / NFC Forum / USB IF
    Chair, IEEE ISTO Printer Working Group
    HP Inc.
*/



> On Jan 14, 2017, at 9:57 AM, Ira McDonald <blueroofmusic at gmail.com> wrote:
> 
> Hi,
> 
> I prefer Mike's suggested text for "job-pages-per-set".  It's more clear
> on the usage and conformance intent.
> 
> Cheers,
> - Ira
> 
> 
> 
> 
> 
> 
> Ira McDonald (Musician / Software Architect)
> Co-Chair - TCG Trusted Mobility Solutions WG
> Chair - Linux Foundation Open Printing WG
> Secretary - IEEE-ISTO Printer Working Group
> Co-Chair - IEEE-ISTO PWG Internet Printing Protocol WG
> IETF Designated Expert - IPP & Printer MIB
> Blue Roof Music / High North Inc
> http://sites.google.com/site/blueroofmusic <http://sites.google.com/site/blueroofmusic>
> http://sites.google.com/site/highnorthinc <http://sites.google.com/site/highnorthinc>
> mailto: blueroofmusic at gmail.com <mailto:blueroofmusic at gmail.com>
> Jan-April: 579 Park Place  Saline, MI  48176  734-944-0094
> May-Dec: PO Box 221  Grand Marais, MI 49839  906-494-2434
> 
> 
> On Sat, Jan 14, 2017 at 11:29 AM, Michael Sweet <msweet at apple.com <mailto:msweet at apple.com>> wrote:
> Smith,
> 
> How about:
> 
> 5.3 job-pages-per-set (integer(1:MAX))
> 
> The RECOMMENDED "job-pages-per-set" Job Template attribute specifies the number of input pages that constitute a set for finishing processes. It is used when the Client generates the copies in the Document content because the Printer does not support the "copies" attribute [RFC2911] for the given Document format. If the Client includes the "job-pages-per-set" Job Template attribute in a Job Creation request:
> 
> - The Client SHOULD NOT include the "copies" Job Template attribute, or if included MUST use the value 1; and
> - The Printer MUST ignore the value of the "copies-default" Printer Description attribute.
> 
> The value of "job-pages-per-set" MUST be evenly divisible with the number of Input Pages since it is being used to demarcate the length of a single copy or Set. See the sections on the "multiple-document-handling" Job Template attribute [RFC2911] for more information on using this attribute with multiple Document Jobs.
> 
> For example, if a Client submits a 14 page PWG Raster Format [PWG5102.4] Document for printing that contains two copies of four duplex pages each, the Client might specify a "job-pages-per-set" Job Template attribute with a value of 7, a "sides" attribute with a value of 'two-sided-long-edge', and a "finishings" attribute with a value of 4 (staple) to have the Printer staple two Sets of four sheets. Figure 4 shows a graphical representation of this example.
> 
>> On Jan 12, 2017, at 7:49 AM, Kennedy, Smith (Wireless Architect) <smith.kennedy at hp.com <mailto:smith.kennedy at hp.com>> wrote:
>> 
>> Greetings,
>> 
>> Here's what I have so far in updating section 5.3, but I would appreciate any editorial help on this:
>> 
>> 5.3 job-pages-per-set (integer(1:MAX))
>> 
>> The RECOMMENDED "job-pages-per-set" Job Template attribute specifies the number of input pages that constitute a set for finishing processes, for scenarios where the Printer does not support the "copies" attribute [RFC2911] for a given document format, and the Client generates the copies in the Document content. If the Printer supports the "copies" Job Template attribute for a given document format, the Printer SHOULD NOT support the "job-pages-per-set" attribute for that same document format. If both are supported for a given document format, when "job-pages-per-set" is specified, "copies" MUST be 1 or omitted since the purpose of the attribute is to specify that the document data contains copies generated by the Client. Specifying "job-pages-per-set" implicitly overrides any "copies" / "copies-default" value to 1. The value of "job-pages-per-set" MUST be evenly divisible with the number of Input Pages since it is being used to demarcate the length of a single copy. See the sections on the "multiple-document-handling" Job Template attribute [RFC2911] for more information on using this attribute with multiple Document Jobs.
>> 
>> To illustrate how the "job-pages-per-set" attribute ought to be employed, if a Client submits a 14 page PWG Raster Format [PWG5102.4] Document for printing that contains two copies of four duplex pages each, the Client might specify a "job-pages-per-set" Job Template attribute with a value of 7, a "sides" attribute with a value of 'two-sided-long-edge', and a "finishings" attribute with a value of 4 (staple) to have the Printer staple two Sets of four sheets. Figure 4 shows a graphical representation of this example.
>> 
>> 
>> Feedback? Changes? Alternatives?
>> 
>> Smith
>> 
>> /**
>>     Smith Kennedy
>>     Wireless Architect - Client Software - IPG-PPS
>>     Standards - IEEE ISTO PWG / Bluetooth SIG / Wi-Fi Alliance / NFC Forum / USB IF
>>     Chair, IEEE ISTO Printer Working Group
>>     HP Inc.
>> */
>> 
>> 
>> 
>> _______________________________________________
>> ipp mailing list
>> ipp at pwg.org <mailto:ipp at pwg.org>
>> https://www.pwg.org/mailman/listinfo/ipp <https://www.pwg.org/mailman/listinfo/ipp>
> 
> _________________________________________________________
> Michael Sweet, Senior Printing System Engineer
> 
> 
> _______________________________________________
> ipp mailing list
> ipp at pwg.org <mailto:ipp at pwg.org>
> https://www.pwg.org/mailman/listinfo/ipp <https://www.pwg.org/mailman/listinfo/ipp>
> 
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.pwg.org/pipermail/ipp/attachments/20170115/6a77e859/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 4241 bytes
Desc: not available
URL: <http://www.pwg.org/pipermail/ipp/attachments/20170115/6a77e859/attachment.p7s>


More information about the ipp mailing list